Impact of Thermomechanical Fiber Pre-Treatment Using Twin-Screw Extrusion on the Production and Properties of Renewable Binderless Coriander Fiberboards

Влияние термомеханической предварительной обработки волокон методом двухшнековой экструзии на производство и свойства возобновляемых бес связующих кориандровых древесноволокнистых плит
Othmane Merah, Thierry Talou, Philippe Evon, Evelien Uitterhaegen, Stéphane Ballas, Thierry Véronèse, Laurent Labonne
2017-07-17

binderless fiberboardscoriander strawthermoplastic protein binderthickness swellingtwin-screw extrusion
The aim of this study consisted of manufacturing renewable binderless fiberboards from coriander straw and a deoiled coriander press cake, thus at the same time ensuring the valorization of crop residues and process by-products. The press cake acted as a natural binder inside the boards owing to the thermoplastic behavior of its protein fraction during thermopressing. The influence of different fiber-refining methods was evaluated and it was shown that a twin-screw extrusion treatment effectively improved fiber morphology and resulted in fiberboards with enhanced performance as compared to a conventional grinding process. The best fiberboard was produced with extrusion-refined straw using a 0.4 liquid/solid (L/S) ratio and with 40% press cake addition. The water sensitivity of the boards was effectively reduced by 63% through the addition of an extrusion raw material premixing operation and thermal treatment of the panels at 200 °C, resulting in materials with good performance showing a flexural strength of 29 MPa and a thickness swelling of 24%. Produced without the use of any chemical adhesives, these fiberboards could thus present viable, sustainable alternatives for current commercial wood-based materials such as oriented strand board, particleboard and medium-density fiberboard, with high cost-effectiveness.
1
Premixing the extrusion raw material and thermally treating panels at 200 °C reduced water sensitivity by 63%, yielding 29 MPa flexural strength and 24% thickness swelling.
2
Renewable binderless fiberboards were manufactured from coriander straw and deoiled press cake, valorizing both crop residues and processing by-products.
3
The best formulation used extrusion-refined straw, a 0.4 liquid/solid ratio, and 40% press cake addition.
4
The press cake served as a natural binder because its protein fraction became thermoplastic during thermopressing.
5
Twin-screw extrusion improved fiber morphology and produced better-performing fiberboards than conventional grinding.

Renewable binderless fiberboards manufactured from coriander straw and deoiled coriander press cake

The effects of thermomechanical fiber pre-treatment by twin-screw extrusion on fiber morphology, board production, mechanical performance, and water sensitivity

Publication Details
Publication Date
2017-07-17
Journal
Publisher
ISSN
Cited by
50
Access Type
Author Information
Authors
Othmane Merah
Thierry Talou
Philippe Evon
Evelien Uitterhaegen
Stéphane Ballas
Thierry Véronèse
Laurent Labonne
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%