Titanium-containing coagulants for foundry wastewater treatment
Титаносодержащие коагулянты для очистки сточных вод литейного производства
2020-12-29
SCID: 54.1/jswygupk
Discuss with AI
foundry wastewater treatmentsuspended solids removaltitanium tetrachloridetitanium-containing coagulantswater jet surface cleaning
Figures from the paper
Abstract (AI)
Setting up a circulation water supply system is a prerequisite for a modern competitive steel making company. The most frequent problem faced by steel makers includes the challenge of removing suspended solids from large volumes of wastewater. Residual concentration of suspended solids (1-10 mg/l) is the main criterion of treatment efficiency. The most difficult task is to remove particles smaller than 1-2 microns, which stay suspended for a long time. One of the biggest sources of wastewater includes the process of removing residual molding sand from machine parts by water jet surface cleaning. Apart from high concentrations of suspended solids, process wastewater have high concentrations of dissolved organic compounds and require prior treatment before it can go to municipal wastewater treatment plants. Titanium-containing coagulants are being used more and more commonly in water treatment processes due to their high efficiency and the lack of most of the drawbacks inherent in conventional coagulants. This paper compares the conventional coagulants (i.e. aluminum and iron compounds) and coagulants containing titanium salts. In addition, complex titanium-containing coagulants were tested in the actual process of removing residual molding sand from machine parts by water jet surface cleaning. The findings show that titanium tetrachloride outperforms the conventionally used aluminum sulphate and iron chloride, while the effective dose of titanium tetrachloride is on average 2.5 to 3.0 times smaller. The obtained experimental data characterize the effect of added titanium compounds on the water treatment efficiency when conventional reagents are used. It was found that the addition 7.5 wt% of titanium tetrachloride to the conventional aluminum sulphate increases the treatment performance of the latter by 30%. The high efficiency of titanium-containing reagents is due to specific hydrolysis effects, as well as nucleation and flocculation at the surface of hydrolysis products. The rate of sedimentation and filtration of sludges resultant from water treatment with titanium-containing coagulants significantly exceeded that reached when using conventional reagents. The use of titanium-containing reagents will enable to transfer to smaller settlers and filters, reduce the consumption of reagents and reach an enhanced treatment performance. The treated water can be reused or discharged into municipal sewage treatment plants. This research study was carried out as part of the programme supporting research projects carried out by young staff of D. Mendeleev University of Chemical Technology of Russia (Application З-2020-013)
Key Findings
1
Adding 7.5 wt% titanium tetrachloride to aluminum sulfate increased treatment performance by 30%.
2
The effective titanium tetrachloride dose was on average 2.5–3.0 times lower than doses of conventional coagulants.
3
Their efficiency is attributed to specific hydrolysis, nucleation, and flocculation on hydrolysis-product surfaces, enabling smaller settlers and filters and reduced reagent consumption.
4
Titanium tetrachloride outperformed conventional aluminum sulfate and iron chloride coagulants for foundry wastewater treatment.
5
Titanium-containing coagulants produced sludges with significantly higher sedimentation and filtration rates than conventional reagents.
Research Object
Foundry process wastewater from water-jet removal of residual molding sand from machine parts
Research Subject
Treatment efficiency, required coagulant dose, hydrolysis-driven nucleation and flocculation, and sludge sedimentation and filtration performance of titanium-containing versus conventional aluminum- and iron-based coagulants
Publication Details
Publication Date
2020-12-29
Journal
Publisher
ISSN
Cited by
4
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest