Electrophoretic Capture and Detection of Nanoparticles at the Opening of a Membrane Pore Using Scanning Electrochemical Microscopy
Электрофоретический захват и детектирование наночастиц у отверстия мембранной поры с использованием сканирующей электрохимической микроскопии
2004-09-14
SCID: 54.1/jt2cr8am
Discuss with AI
amperometric detectionconical nanoporeselectrophoretic nanoparticle captureelectrostatic and entropic forcesscanning electrochemical microscopy
Figures from the paper
Abstract (AI)
Stochastic electrophoretic capture of individual nanometer-scale particles at the small opening of a conically shaped nanopore in a synthetic membrane is described. Particle capture is sensed using a scanning electrochemical microscope (SECM) to measure the decrease in the transport rate of a redox-active molecule through the pore. The SECM tip is positioned at the larger backside opening of pore and used to amperometrically monitor the transport rate prior, during, and after particle capture. Following capture, the particle is released by electrophoretically driving it out of the pore opening and back into the solution. The capture and release method is demonstrated by detection of charged polystyrene spheres (43-150-nm diameter) using a polycarbonate membrane with conically shaped pores, the small opening of the pore having a diameter of 60 nm. The inverse of the time to capture polystyrene spheres increases with particle concentration over the range 10(8)-10(10) particles/mL. Selective detection based on nanoparticle charge and size is also demonstrated. A quantitative theoretical description of the rate of particle capture is presented, and the physical mechanism of particle capture, based on the balance of electrostatic and entropic forces, is considered.
Key Findings
1
Charged polystyrene spheres 43–150 nm in diameter were detected using 60-nm small-opening pores in polycarbonate membranes.
2
Individual nanoparticles are stochastically captured at the small opening of conical nanopores through electrophoretic transport.
3
Particle capture is attributed to competition between electrostatic and entropic forces.
4
Particles can be electrophoretically released, while charge- and size-selective detection and a quantitative capture-rate model are demonstrated.
5
Scanning electrochemical microscopy detects capture by amperometrically monitoring reduced redox-molecule transport through the pore.
6
The inverse capture time increases with particle concentration from 10^8 to 10^10 particles/mL, enabling concentration-dependent detection.
Research Object
Charged polystyrene nanoparticles captured at the small opening of a conically shaped nanopore in a synthetic polycarbonate membrane
Research Subject
Stochastic electrophoretic capture, electrochemical detection, release, concentration-dependent capture kinetics, and charge- and size-selective behavior governed by electrostatic and entropic forces
Publication Details
Publication Date
2004-09-14
Journal
Publisher
ISSN
Cited by
129
Access Type
Author Information
Download PDF
Subscribe to digest