Micro-characterization of Dust and Materials of Dust Origin at a Cement Industry Located in Bangladesh
Микрохарактеристика пыли и материалов — источников пыли на цементном предприятии в Бангладеш
2022-10-17
SCID: 54.1/kktchz2q
Discuss with AI
SEM-EDSasbestos mineralscement industry dustcrystalline silicaoccupational health exposure
Figures from the paper
Abstract (AI)
Industrial dust generation from material processing is an uninterrupted phenomenon, hence analyzing materials of dust origin with dust particles is important to comprehend the entire scenario of occupational health exposure (OHE). In this study, we investigated the morphological, elemental, and mineralogical characteristics of engendered dust and materials of dust origin in the cement industry (CI) in Bangladesh. The dust samples were accumulated from dust collectors and the internal roadways of the CI to understand the nature of atmospheric dust of the CI. All the materials that could potentially be the sources of the dust of the CI were collected, including clinker, gypsum, limestone, fly ash, slag, and two types of cement products. Scanning electron microscopy with energy dispersive x-ray spectroscopy (SEM-EDS), x-ray powder diffraction (XRD), and fourier-transform infrared spectroscopy (FTIR) were performed for the characterization. SEM micrographs showed the presence of fine (particles ≤ PM2.5) and ultra-fine (particles ≤ PM0.1) particles with diverse morphology in the studied samples. Ca, Si, Al, Mg, Fe, K, Na, Mo, and Ti were found as existing metallic elements in samples through the EDS technique. Several minerals of silicate, oxide, carbonate, and sulfate were detected with major crystalline phases of Portland cement by SEM-EDS, XRD, and FTIR analyses in samples; among which some are well documented as occupational hazards. The trace presence of organic carbon was observed in all FTIR spectra. The most significant outcome of this study is the detection of carcinogenic substances such as crystalline silica (quartz, cristobalite) and asbestoses (anthophyllite, chrysotile, and crocidolite) in samples. For instance, quartz was found in the dust of dust collectors while road dust of the CI showed the existence of both quartz and cristobalite. However, asbestoses were found only in source materials, but they could be released anytime during material handling, thus creating OHE.
Key Findings
1
Asbestos minerals anthophyllite, chrysotile, and crocidolite were detected in source materials, creating a potential hazard during material handling even though they were not found in sampled dust.
2
Crystalline silica phases, including quartz and cristobalite, were detected in cement-industry dust; quartz occurred in collector dust, whereas road dust contained quartz and cristobalite.
3
Detected metallic elements included Ca, Si, Al, Mg, Fe, K, Na, Mo, and Ti, while identified minerals included silicates, oxides, carbonates, and sulfates.
4
Dust samples contained fine particles (≤PM2.5) and ultrafine particles (≤PM0.1) with diverse morphologies, indicating potential occupational inhalation exposure.
5
The study characterized cement-industry dust and potential source materials in Bangladesh using SEM-EDS, XRD, and FTIR analyses.
6
Trace organic carbon was present in all FTIR spectra, and several identified mineral phases are documented occupational hazards.
Research Object
Dust and dust-source materials (clinker, gypsum, limestone, fly ash, slag, and cement products) in a cement industry in Bangladesh
Research Subject
Morphological, elemental, and mineralogical characteristics of generated dust and dust-source materials, including the presence of fine and ultrafine particles and occupationally hazardous minerals
Publication Details
Publication Date
2022-10-17
Journal
Publisher
ISSN
Cited by
7
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest