Strategies for the Implementation of Chenodeoxycholic Acid in Natural Polymer-Based Hydrogels for Stable and Low-Light Effective Quasi-Solid Electrolytes for Aqueous Dye-Sensitized Solar Cells
Стратегии внедрения хенодезоксихолевой кислоты в гидрогели на основе природных полимеров для стабильных и эффективных при низком освещении квазитвердых электролитов для водных красочно-чувствительных солнечных элементов
2025-11-25
SCID: 54.1/m46bscpc
Discuss with AI
aqueous dye-sensitized solar cellsbiopolymer-based hydrogelschenodeoxycholic acid (CDCA)porcine gelatinquasi-solid electrolytes
Figures from the paper
Abstract (AI)
The disclosing of the full potential of aqueous Dye-Sensitized Solar Cells (a-DSSCs) is tightly bonded to the implementation of more sustainable, stable, and efficient electrolytes which are able to perform both in outdoor and indoor environments. In this contribution, we report the formulation of biopolymer-based hydrogels (e.g., chitosan, carrageenan, and porcine gelatin) in conjunction with ZnO nanoparticles and their application as electrolytes in quasi-solid-state a-DSSC. The thorough characterization (XRD, IR, SEM) of the hydrogels reveals tunable morphology impacting their ability to stabilize a I-based redox mediator and chenodeoxycholic acid (CDCA) employed as an additive. Once implemented in a-DSSCs, all the biopolymer-based quasi-solid electrolytes perform well, delivering a photoconversion efficiency (PCE) approaching or even overcoming 1% (comparable to the one of a reference cell based on xanthan gum), showing an extremely high open circuit voltage (>700 mV). The addition of CDCA, alternatively during the gel formulation or washing phase, enables the porcine gelatin-derived systems to increase their efficiency of about 50% and carrageenan ones to ensure an extremely promising shelf life with any PCE decrease over more than 15 days. More importantly, the porcine gelatin-derived, CDCA-additivated electrolytes are able to properly perform also under indoor light (i.e., 1200 lx), showing PCE values approaching 3% and outperforming reference devices. Our results prove how a thoughtful selection of the polymer scaffold and a specifically designed preparation strategy are fundamental to improve the efficiency of sustainable quasi-solid aqueous electrolytes.
Key Findings
1
Adding CDCA (during gel formulation or washing) increases porcine gelatin-derived electrolyte efficiency by about 50%.
2
All tested biopolymer quasi-solid electrolytes achieved photoconversion efficiencies around or above 1% and very high open-circuit voltages (>700 mV), comparable to xanthan gum reference cells.
3
Biopolymer-based hydrogels (chitosan, carrageenan, porcine gelatin) with ZnO nanoparticles function as quasi-solid electrolytes for aqueous DSSCs.
4
CDCA addition to carrageenan-based electrolytes yields an extremely promising shelf life with no PCE decrease over more than 15 days.
5
Careful selection of polymer scaffold and specific preparation strategies are crucial to improve efficiency of sustainable quasi-solid aqueous electrolytes.
6
Hydrogel morphology (characterized by XRD, IR, SEM) can be tuned to stabilize I-based redox mediator and chenodeoxycholic acid (CDCA) additive.
7
Porcine gelatin-derived, CDCA-additivated electrolytes perform well under indoor light (1200 lx), reaching PCE values approaching 3% and outperforming reference devices.
Research Object
Biopolymer-based quasi-solid-state aqueous electrolytes (chitosan, carrageenan, porcine gelatin) with ZnO nanoparticles and chenodeoxycholic acid additive for aqueous dye-sensitized solar cells
Research Subject
How formulation choices (polymer scaffold, ZnO nanoparticles, CDCA addition timing) affect stability, photoelectrochemical performance (PCE, open-circuit voltage), shelf life and low-light (indoor) effectiveness of the quasi-solid aqueous electrolytes in a-DSSCs
Publication Details
Publication Date
2025-11-25
Journal
Publisher
ISSN
Cited by
0
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest