Optimizing Covalent Immobilization of Glucose Oxidase and Laccase on PV15 Fluoropolymer-Based Bioelectrodes
Оптимизация ковалентной иммобилизации глюкозооксидазы и лакказы на биоэлектродах на основе фторполимера PV15
2022-12-01
SCID: 54.1/mc5g2y9v
Discuss with AI
covalent enzyme immobilizationdirect electron transferenzymatic biofuel cellsglucose oxidaselaccase biocathodes
Figures from the paper
Abstract (AI)
Enzymatic biofuel cells (EBCs) represent a promising technology for biosensors, biodevices, and sustainable green energy applications, thanks to enzymes’ high specificity and catalytic efficiency. Nevertheless, drawbacks such as limited output power and short lifetime have to be solved. Nowadays, research is addressed to the use of 3D electrode structures, but the high cost and the industrialization difficulties of such electrodes represent a key issue. The purpose of the paper is thus to describe the use of a low-cost commercial conductive polymer (Sigracell® PV15) as support for the covalent immobilization of glucose oxidase and laccase, for bioanode and biocathode fabrication, respectively. Efficient immobilization protocols were determined for the immobilized enzymes in terms of employed linkers and enzyme concentrations, resulting in significant enzymatic activities for units of area. The analysis focuses specifically on the optimization of the challenging immobilization of laccase and assessing its stability over time. In particular, an optimum activity of 23 mU/cm2 was found by immobilizing 0.18 mg/cm2 of laccase, allowing better performances, as for voltage output and electrochemical stability, and a direct electron transfer mechanism to be revealed for the fabricated biocathode. This study thus poses the basis for the viable development of low-cost functional EBC devices for biomedical applications.
Key Findings
1
Immobilization protocols were optimized by varying linkers and enzyme concentrations, producing significant area-normalized enzymatic activities.
2
Sigracell® PV15, a low-cost commercial conductive fluoropolymer, supported covalent immobilization of glucose oxidase and laccase for bioanode and biocathode fabrication.
3
The optimized laccase biocathode improved voltage output and electrochemical stability, while revealing a direct electron transfer mechanism.
4
The optimized laccase loading was 0.18 mg/cm², yielding a maximum activity of 23 mU/cm².
5
The results establish a basis for developing low-cost enzymatic biofuel cells for biomedical applications, although limited power and lifetime remain broader challenges.
Research Object
Covalently immobilized glucose oxidase and laccase on Sigracell® PV15 fluoropolymer-based bioelectrodes for enzymatic biofuel cells
Research Subject
Optimization of enzyme immobilization protocols, laccase activity and stability, voltage output, electrochemical stability, and direct electron transfer in the bioelectrodes
Publication Details
Publication Date
2022-12-01
Journal
Publisher
ISSN
Cited by
4
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest