Improved compatibilized TPS/PLA blends: effects of singular and binary compatibilization systems

Улучшенные компатибилизированные смеси TPS/PLA: влияние одно- и бинарных систем компатибилизации
Soheil Farshbaf Taghinezhad, Mohammadreza Mansourieh, Amin Abbasi, Ian Major, Romina Pezzoli
2025-04-28

maleic anhydride graftingpolybutylene adipate terephthalatepolylactic acid blendsreactive compatibilizationthermoplastic starch
Thermoplastic starch (TPS) is one of the main biobased and biodegradable candidates to substitute general-purpose petroleum-based polymers used in the packaging industry. However, TPS shows poor mechanical properties, mainly low elongation at break and toughness, restricting its usage in many applications. Blending TPS with other polymers, such as polylactic acid (PLA), is a common strategy to improve its performance; nonetheless, due to their immiscibility and low physical interaction between the phases, this strategy faces some challenges. Herein, a commercial grade of TPS was melt-mixed with PLA using various non-reactive and reactive compatibilization systems to increase the interfacial interaction of the blend and therefore, improve the mechanical performance. Polybutylene adipate terephthalate (PBAT) and poly(ethylene-co-glycidyl methacrylate) (EGMA) alongside synthesized PLA- grafted -maleic anhydride (MAPLA) and PBAT- grafted -maleic anhydride (MAPBAT) and their combinations were added to TPS/PLA blends. EGMA and MA-grafted compatibilizers were selected due to their ability to react with PLA and TPS on their hydroxyl groups and hence demonstrate reactive compatibilization. The mechanical, morphological, rheological, and thermal properties of these composites were evaluated and compared against each other. Although all the compatibilizers improved the mechanical properties of the TPS/PLA blend, the TPS/PLA/MAPBAT and TPS/PLA/MAPBAT/EGMA systems showed the greatest effect, enhancing the ductile behaviour of the blend and increasing the tensile strain at break from 6 % to 37 % and 73 %, respectively. Morphological studies confirmed that MA-grafted compatibilizers significantly reduced the average dispersed PLA domain diameter decreasing from 1.35 µm in non-compatibilized blends to 0.35 µm in TPS/PLA/MAPBAT/EGMA. The compatibilized TPS/PLA blends also showed enhancements in the thermal properties, more pronounced for samples containing EGMA and MAPBAT. This research is significant in the identification and development of suitable compatibilization systems for various polymeric blends in regard to their application.
1
All compatibilization systems improved the mechanical properties of TPS/PLA blends, with MAPBAT and MAPBAT/EGMA producing the strongest effects.
2
Compatibilized blends exhibited improved thermal properties, with the most pronounced enhancements observed in formulations containing EGMA and MAPBAT.
3
Maleic-anhydride-grafted compatibilizers reduced the average dispersed PLA domain diameter from 1.35 μm in non-compatibilized blends to 0.35 μm with MAPBAT/EGMA.
4
TPS/PLA/MAPBAT increased tensile strain at break from 6% to 37%, while TPS/PLA/MAPBAT/EGMA increased it to 73%, substantially enhancing ductility.
5
Various non-reactive and reactive compatibilizers were evaluated to improve interfacial interaction and mechanical performance in immiscible TPS/PLA blends.

compatibilized thermoplastic starch/polylactic acid (TPS/PLA) blends containing singular or binary compatibilization systems

the effects of non-reactive and reactive compatibilizers and their combinations on the interfacial morphology, mechanical, rheological, and thermal properties of TPS/PLA blends

Publication Details
Publication Date
2025-04-28
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Soheil Farshbaf Taghinezhad
Mohammadreza Mansourieh
Amin Abbasi
Ian Major
Romina Pezzoli
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%