Graphene Oxide‐Based Polymeric Membranes for Water Treatment
Полимерные мембраны на основе оксида графена для очистки воды
2018-05-21
SCID: 54.1/nmahrhp4
Discuss with AI
desalinationgraphene oxidemembrane foulingpolymeric membraneswater treatment
Figures from the paper
Abstract (AI)
Abstract Membrane technologies for water treatment and desalination are increasingly developed and utilized to address the global challenges of water security and supply. Membrane‐based separations can produce water with desirable qualities from a wide range of water sources, such as groundwater, seawater, brackish water, and wastewater. However, the membranes, which are typically made from polymers, are still restricted by their inherent limitations, including a permeability/selectivity trade‐off and a high fouling propensity. Functionalized graphene (i.e., graphene oxide and its functionalized derivates) is regarded as a very promising nanomaterial for overcoming these limitations owing to its superior hydrophilicity, mechanical stability, bacteriostasis, and biocidal properties. The addition of a small amount of this nanomaterial (normally less 1 wt% based on the weight of polymer) into polymeric membranes significantly improves their physicochemical properties and provides new functionalities. In this review, the recent advances in the preparation of functionalized graphene and its integration into polymer membranes for water treatment are summarized. The influences of functionalized graphene on the separation performance, antifouling ability, chlorine resistance, and mechanical properties of membranes are revealed. Current challenges and future perspectives in the development of high‐performance functionalized graphene–polymer membranes are also discussed.
Key Findings
1
Adding typically less than 1 wt% functionalized graphene to polymer membranes significantly improves physicochemical properties and introduces new functionalities.
2
Functionalized graphene–polymer membranes can enhance separation performance, antifouling ability, chlorine resistance, and mechanical properties.
3
Graphene oxide and functionalized graphene offer hydrophilicity, mechanical stability, bacteriostatic activity, and biocidal properties that can address these limitations.
4
Polymeric water-treatment membranes are limited by an inherent permeability–selectivity trade-off and high fouling propensity.
5
The review identifies current challenges and future directions for developing high-performance functionalized graphene–polymer membranes for water treatment.
Research Object
graphene oxide-based polymeric membranes for water treatment
Research Subject
the effects of functionalized graphene integration on membrane separation performance, antifouling ability, chlorine resistance, and mechanical properties
Publication Details
Publication Date
2018-05-21
Journal
Publisher
ISSN
Access Type
Author Information
Download PDF
Subscribe to digest