Reconfigurable InP waveguide components using the Sb 2 S 3 phase change material
Перенастраиваемые компоненты волноводов на основе InP с использованием фазопереходного материала Sb₂S₃
2022-07-05
SCID: 54.1/ntktnkdr
Discuss with AI
InP waveguidesMach–Zehnder interferometerSb2S3 phase-change materiallaser-induced crystallisationreconfigurable optical switching
Figures from the paper
Abstract (AI)
Abstract Reconfigurable waveguide components are promising building blocks for photonic neural networks and as an optical analogue to field-programmable gate arrays. By changing the effective index of the waveguide, reconfigurable waveguide components can achieve on-chip light routing and modulation. In this paper, we design and demonstrate an Sb 2 S 3 -reconfigurable InP membrane Mach–Zehnder interferometer (MZI) on a silicon substrate. Sb 2 S 3 , which has tunable refractive index and low absorption in the near-infrared spectrum, was patterned on the InP waveguide MZIs to make an optical switch in the telecoms conventional-band. By laser induced crystallisation of the Sb 2 S 3 , it was possible to control interference in the MZI and achieve 18 dB on/off switching at 1540 nm. Laser reamorphisation and reversible switching of the Sb 2 S 3 layer resulted in damage to the waveguide structure. However, simulations show that transition metal di-chalcogenide two-dimensional crystal layers can act as efficient thermal barriers that prevent thermal damage to the waveguide during laser amorphisation. Therefore, combining Sb 2 S 3 with InP waveguides seems to be a feasible approach to achieve low-loss reprogrammable waveguide components for on-chip photonics routing and neural networks.
Key Findings
1
An Sb₂S₃-reconfigurable InP membrane Mach–Zehnder interferometer was designed and demonstrated on a silicon substrate.
2
Combining Sb₂S₃ with InP waveguides is identified as a feasible route toward low-loss, reprogrammable photonic routing and neural-network components.
3
Laser reamorphization enabled reversible Sb₂S₃ switching but damaged the InP waveguide structure.
4
Laser-induced crystallization of Sb₂S₃ controlled MZI interference and achieved 18 dB on/off switching at 1540 nm in the conventional telecom band.
5
Simulations indicate that transition-metal dichalcogenide two-dimensional crystal layers could thermally protect the waveguide during laser amorphization.
Research Object
Sb2S3-reconfigurable InP membrane Mach–Zehnder interferometer waveguide components on a silicon substrate
Research Subject
Reversible optical switching and reconfigurability through Sb2S3 crystallization and amorphization, including switching performance and thermal-damage mitigation
Publication Details
Publication Date
2022-07-05
Journal
Publisher
ISSN
Cited by
23
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai5
Neuromorphic photonic networks using silicon photonic weight banks2017
Broadband nonvolatile photonic switching based on optical phase change materials: beyond the classical figure-of-merit2017
Low-Loss and Broadband Nonvolatile Phase-Change Directional Coupler Switches2019
Comparison and analysis of phase change materials-based reconfigurable silicon photonic directional couplers2021
A scheme for simulating multi-level phase change photonics materials2021