The effects of early inlet valve closing and cylinder disablement on fuel economy and emissions of a direct injection diesel engine

Влияние раннего закрытия впускного клапана и отключения цилиндров на топливную экономичность и выбросы дизельного двигателя с непосредственным впрыском
Ian G. Pegg, J.P. Zammit, Michael McGhee, Paul J. Shayler, Theo Law
2014-12-03

cylinder deactivationdirect injection diesel engineearly inlet valve closingengine-out emissionsfuel economy
The influence of EIVC (early inlet valve closure) on emissions, fuel economy and exhaust gas temperature of a turbocharged, 4 cylinder common rail direct injection diesel engine has been investigated and compared with the influence of deactivating two cylinders. IVC (inlet valve closing) timings were set at up to 60 CA (crank angle) degrees earlier than the production setting of 37° ABDC for the engine. At the earliest timing, effective compression ratio was reduced from 15.2:1 to 13.7:1. The effects on emissions were significant only for EIVC settings at least 40 CA degrees earlier than the production setting, and were sensitive to engine load. At 2 bar BMEP (brake mean effective pressure) and fixed levels of NOx, soot emissions were reduced but CO (carbon monoxide) and HC (hydrocarbon) increased unless fuel rail pressure was reduced. With increasing load, soot reduction diminished and was negligible at 6 bar BMEP; CO and HC emissions deteriorated further. At all conditions, EIVC raised exhaust gas temperature by >50 °C; the effect on fuel economy was negligible or a fuel economy penalty. Comparisons indicate cylinder deactivation is the more effective strategy for reducing engine-out emissions of HC and CO and raising exhaust gas temperature under light load operating conditions.
1
At 2 bar BMEP and fixed NOx, early inlet valve closing reduced soot but increased CO and HC unless fuel rail pressure was also reduced.
2
Early inlet valve closing increased exhaust gas temperature by more than 50 °C but provided negligible or poorer fuel economy; cylinder deactivation was more effective for reducing HC and CO and increasing exhaust temperature at light load.
3
Early inlet valve closing up to 60 crank-angle degrees before production timing reduced the effective compression ratio from 15.2:1 to 13.7:1.
4
Emission effects became significant only when inlet valve closing was advanced by at least 40 crank-angle degrees, and depended strongly on engine load.
5
With increasing load, soot reduction diminished to negligible levels at 6 bar BMEP, while CO and HC emissions worsened further.

a turbocharged, four-cylinder common-rail direct-injection diesel engine

the effects of early inlet valve closing and deactivating two cylinders on fuel economy, engine-out emissions, and exhaust gas temperature under varying loads

Publication Details
Publication Date
2014-12-03
Journal
Publisher
ISSN
Cited by
45
Access Type
Author Information
Authors
Ian G. Pegg
J.P. Zammit
Michael McGhee
Paul J. Shayler
Theo Law
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%