Numerical Simulation-Based Study on the Arching Effect in Subsequent Backfill
Исследование эффекта сводообразования в последующей закладке на основе численного моделирования
2025-05-19
SCID: 54.1/qnkcnwm3
Discuss with AI
arching effectbackfill structuresfinite-difference methodrock–backfill interactionthree-dimensional numerical modeling
Figures from the paper
Abstract (AI)
To explore the influence of the arching effect on stress distribution in jointed backfill structures, this study employs three-dimensional numerical modeling to systematically analyze the mechanical behavior of backfill materials. A finite-difference approach was adopted to establish a representative stope model incorporating interface elements to simulate rock–backfill interactions. The methodology involved parametric studies examining key material properties (internal friction angle, cohesion, elastic modulus, Poisson’s ratio) and geometric configurations, with boundary conditions derived from typical mining scenarios. The results demonstrate that stress distribution follows nonlinear relationships with all investigated parameters. Increasing the internal friction angle and the cohesion reduce internal stresses, though the arch effect exhibits a distinct upper limit. Mechanical properties significantly influence stress transfer characteristics, with the elastic modulus governing stiffness response and the Poisson’s ratio affecting lateral stress development. Geometric parameters control the spatial extent of arching, with larger dimensions modifying the stress redistribution pattern. This research quantitatively establishes the operational limits of arching in backfill structures, providing crucial thresholds to prevent stability risks from overestimating its benefits. The findings offer practical guidelines for optimizing backfill design in deep mining and paste filling applications, contributing both technical solutions for mine safety and fundamental insights for geomechanical theory. The developed methodology serves as a robust framework for future studies on complex backfill behavior under various loading conditions.
Key Findings
1
A three-dimensional finite-difference model with interface elements was developed to simulate rock–backfill interactions and stress redistribution in jointed backfill structures.
2
Elastic modulus primarily governed stiffness response, while Poisson’s ratio influenced lateral stress development and stress-transfer characteristics.
3
Geometric dimensions controlled the spatial extent and pattern of arching, enabling quantitative operational limits for safer backfill design in deep mining and paste filling.
4
Increasing internal friction angle and cohesion reduced internal stresses, but the arching effect had a distinct upper limit.
5
Stress distributions showed nonlinear relationships with internal friction angle, cohesion, elastic modulus, Poisson’s ratio, and geometric configuration.
Research Object
jointed backfill structures in deep-mining stopes
Research Subject
the arching effect and its influence on stress redistribution, stress transfer, and operational limits under varying material properties and geometric configurations
Publication Details
Publication Date
2025-05-19
Journal
Publisher
ISSN
Cited by
5
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest