Surfactant–Polymer Flooding: Influence of the Injection Scheme

Заводнение с применением поверхностно-активного вещества и полимера: влияние схемы закачки
Francesco Picchioni, Pablo Druetta
2018-10-30

chemical slug injectionenhanced oil recoveryreservoir simulationsurfactant-polymer floodingsweep efficiency
The use of standard enhanced oil recovery (EOR) techniques allows for the improvement of oilfield performance after waterflooding processes. Chemical EOR methods modify different properties of fluids and/or rock to mobilize the remaining oil. Moreover, combined techniques have been developed to maximize the performance by using the joint properties of the chemical slugs. A new simulator is presented to study a surfactant-polymer flooding, based on a two-phase, five-component system (aqueous and oleous phases with water, petroleum, polymer, surfactant, and salt) for a 2D reservoir model. The physical properties modified by these chemicals are considered as well as the synergy between them. The analysis of the chemical injection strategy is deemed vital for the success of the operations. This plays a major role in the efficiency of the recovery process, including the order and the time gap between each chemical slug injection. As the latter is increased, the flooding tends to behave as two separate processes. Best results are found when both slugs are injected overlapped, with the polymer in first place which improves the sweeping efficiency of the viscous oil. This simulator can be used to study different chemical combinations and their injection procedure to optimize the EOR process.
1
A new simulator models surfactant–polymer flooding in a two-phase, five-component system for a two-dimensional reservoir.
2
Best recovery results occur with overlapping slugs, injecting polymer first to improve sweeping of viscous oil.
3
Increasing the time gap between slug injections makes the flooding increasingly resemble two separate processes.
4
Injection order and timing between chemical slugs strongly influence enhanced oil recovery efficiency.
5
The simulator incorporates chemical effects on fluid and rock properties, including synergy between surfactant and polymer.

surfactant–polymer flooding in a 2D oil-reservoir model

the influence of chemical slug injection order, overlap, and time gap on oil-recovery efficiency and sweep performance

Publication Details
Publication Date
2018-10-30
Journal
Publisher
ISSN
Cited by
67
Access Type
Author Information
Authors
Francesco Picchioni
Pablo Druetta
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%