Environmentally Friendly Printable Piezoelectric Inks and Their Application in the Development of All-Printed Touch Screens
Экологически безопасные печатные пьезоэлектрические чернила и их применение при разработке полностью печатных сенсорных экранов
2019-07-29
SCID: 54.1/r7csjznm
Discuss with AI
All-printed touch screensDMPU solventPVDF-TrFE piezoelectric inksPiezoelectric coefficientScreen-printing
Figures from the paper
Abstract (AI)
Piezoelectric inks have been developed based on poly(vinylidene fluoride- co -trifluoroethylene), PVDF-TrFE, dissolved in the environmentally friendly solvent N, N 0 -dimethylpropyleneurea (DMPU). The inks were prepared for different printing techniques, including doctor-blading, spray-printing, and screen-printing, representing therefore a relevant step for the additive manufacturing of sensors, actuators, and touch screens, among others. The rheological properties of the inks demonstrate that DMPU is a good solvent for this polymer and allows one to obtain dense piezoelectric films with the different printing techniques, showing also similar physicochemical and electrical properties. The highest piezoelectric coefficient | d 33 | = 19 pC/N is obtained for films processed by screen-printing, the piezoelectric coefficient being stable over more than 6 weeks. The corresponding PVDF-TrFE films were applied in the development of a touch screen by additive manufacturing, with two screen-printed silver electrodes in the form of an array of touch buttons. The all-printed piezoelectric touch screen allows easy fabrication and, therefore, improved integration into a variety of substrates, including flexible ones.
Key Findings
1
An all-printed touch screen was fabricated using PVDF-TrFE films and array-patterned screen-printed silver electrodes.
2
DMPU enabled dense piezoelectric films with similar physicochemical and electrical properties across the different printing techniques.
3
PVDF-TrFE piezoelectric inks were formulated using environmentally friendly DMPU solvent for doctor-blading, spray-printing, and screen-printing.
4
Screen-printed films achieved the highest piezoelectric coefficient, |d33| = 19 pC/N, remaining stable for more than six weeks.
5
The additive-manufactured touch screen supports easy integration onto diverse substrates, including flexible ones.
Research Object
All-printed PVDF-TrFE piezoelectric touch screens fabricated with environmentally friendly DMPU-based inks
Research Subject
Printability, physicochemical and electrical properties, piezoelectric performance, and flexible-substrate integration of the PVDF-TrFE inks and films
Publication Details
Publication Date
2019-07-29
Journal
Publisher
ISSN
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest