Structural and thermomechanical characterization of a new bio-epoxy composite reinforced with agave waste flower stalk fibers for sustainable applications
Структурная и термомеханическая характеристика нового биоэпоксидного композита, армированного волокнами цветоносов отходов агавы, для устойчивых применений
2026-02-03
SCID: 54.1/rdp84wjg
Discuss with AI
Agave americana flower stalk fibersFickian diffusion modelingbio-epoxy compositescompression moldingthermomechanical characterization
Figures from the paper
Abstract (AI)
This study investigates the fabrication and experimental characterization of bio-epoxy (BioEP) composites reinforced with Agave americana (FSAa) fibers over a fiber loading range of 10–30 wt%. The composites were manufactured by compression molding under controlled pressure and curing conditions, after incorporating the fibers into a bio-based epoxy matrix derived from cashew nutshell liquid. A comprehensive experimental program was adopted, including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) with peak deconvolution using the Asym2Sig model, thermogravimetric analysis (TGA/DTG), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), mechanical testing (tensile and flexural), and water absorption measurements in distilled and seawater based on Fickian diffusion modeling. The experimental results showed that increasing fiber content, particularly up to 30 wt% FSAa, led to improved crystallinity, thermal stability, and mechanical performance, while increasing moisture uptake, thus identifying 30 wt% FSAa as an optimal formulation for sustainable composite applications. • Elaboration and characterization a new sustainable biocomposite for the first time. • Flower stalk fibers of Agave americana waste (FS Aa ) improve fiber-matrix adhesion and reduce hydrophilicity. • Mechanical stiffness increases significantly with higher fiber content. • The thermal stability of composites is strengthened by FS Aa fiber reinforcement. • Water absorption rises with fiber loading but remains lower in seawater than in distilled water.
Key Findings
1
A new bio-epoxy composite reinforced with Agave americana flower-stalk waste fibers was fabricated and characterized for sustainable applications.
2
Agave flower-stalk fibers enhanced fiber–matrix adhesion, reduced hydrophilicity, and significantly increased composite mechanical stiffness.
3
Fiber reinforcement increased moisture uptake, although water absorption remained lower in seawater than in distilled water.
4
Increasing fiber content from 10–30 wt% improved crystallinity, thermal stability, and mechanical performance, with 30 wt% identified as optimal.
5
The study combined FTIR, XRD deconvolution, TGA/DTG, DSC, SEM, mechanical testing, and Fickian diffusion modeling to evaluate composite structure and performance.
Research Object
Bio-epoxy composites reinforced with Agave americana flower stalk waste fibers (FSAa) at 10–30 wt% fiber loading
Research Subject
Structural, thermal, mechanical, interfacial, and moisture-absorption behavior of the composites as a function of fiber loading, including crystallinity, thermal stability, stiffness, fiber–matrix adhesion, hydrophilicity, and Fickian water diffusion in distilled and seawater
Publication Details
Publication Date
2026-02-03
Journal
Publisher
ISSN
Cited by
16
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest