Centrifugal Spinning: An Alternative Approach to Fabricate Nanofibers at High Speed and Low Cost
Центробежное прядение: альтернативный подход к изготовлению нанофибр на высокой скорости и при низкой стоимости
2014-08-30
SCID: 54.1/sec6263h
Discuss with AI
centrifugal spinningelectrospinningfiber production methods comparisonhigh-speed low-cost fabricationnanofibers
Figures from the paper
Abstract (AI)
Nanofibers are an important class of material that is useful in a variety of applications, including filtration, tissue engineering, protective clothing, battery separators, energy storage, etc. So far, electrospinning is the most used method for producing nanofibers. However, the wide-spread commercial use of electrospinning is limited mainly due to its low production rate. Most other nanofiber production methods, such as melt-blowing, bicomponent fiber spinning, phase separation, template synthesis, and self-assembly, are complex and can only be used to make nanofibers from limited types of polymers. Centrifugal spinning is an alternative method for producing nanofibers from various materials at high speed and low cost. In centrifugal spinning, the spinning fluid is placed in a rotating spinning head. When the rotating speed reaches a critical value, the centrifugal force overcomes the surface tension of the spinning fluid to eject a liquid jet from the nozzle tip of the spinning head. The jet then undergoes a stretching process and is eventually deposited on the collector, forming solidified nanofibers. Centrifugal spinning is simple and enables the rapid fabrication of nanofibers for various applications. This article gives an overview on the centrifugal spinning process, and compares it with conventional nanofiber production methods.
Key Findings
1
Centrifugal spinning is an alternative nanofiber fabrication method that can produce nanofibers at high speed and low cost.
2
Centrifugal spinning is simpler and can rapidly fabricate nanofibers from various materials compared to electrospinning and other methods.
3
Electrospinning’s commercial adoption is limited mainly by low production rate, whereas many other methods are complex or limited to certain polymers, motivating centrifugal spinning.
4
In centrifugal spinning, centrifugal force overcomes surface tension to eject a liquid jet from a rotating nozzle, which stretches and solidifies into nanofibers.
5
The article provides an overview of centrifugal spinning and compares it with conventional nanofiber production methods.
Research Object
Centrifugal spinning process for producing nanofibers
Research Subject
High-speed, low-cost fabrication of nanofibers from various materials via jet ejection, stretching, and solidification under centrifugal forces, and comparison with conventional nanofiber production methods
Publication Details
Publication Date
2014-08-30
Journal
Publisher
ISSN
Cited by
405
Access Type
Author Information
Download PDF
Subscribe to digest