Heat treatment to increase self-bonding property of binderless boards manufactured from rice straw
Термическая обработка для повышения способности к самосвязыванию бес связующих плит, изготовленных из рисовой соломы
2022-07-01
SCID: 54.1/t5nxadb5
Discuss with AI
binderless boardsheat treatmentinternal bondingrice strawself-bonding properties
Figures from the paper
Abstract (AI)
Abstract Rice straw is an abundant agricultural waste globally, but it has not been used effectively. Binderless boards manufactured without synthetic resins are an environment-friendly material, and they are also a possible way to utilize rice straw. However, the presence of wax and silica on the surface of rice straw reduces the bonding ability. The study objective was to manufacture binderless boards from heat-treated rice straws and investigate the effect of heat treatment on the self-bonding properties. Heat treatment was performed on chips or powder from rice straw (≤50 mm, 1 mm) at 200 °C, 1.5 MPa for 0–60 min. Heat-treated rice straw (≤50 mm, 1 mm, 150 µm) was hot-pressed to form binderless boards at 220 °C and 5 MPa for 10 min. The resulting board was 300 × 300 × 5 mm, 0.8 g/cm3. The mechanical and physical properties of the boards were tested according to the JIS A5905-2014 standards. Electron microscopy (SEM), particle-size distribution, and gas chromatography-mass spectrometry (GC-MS) analyses were conducted to examine the effect of heat treatment. The results showed that heat treatment for more than 40 min increased internal bonding because of physical and chemical changes in the rice straw.
Key Findings
1
Binderless boards were manufactured by hot-pressing treated rice straw at 220 °C and 5 MPa for 10 minutes, producing 300 × 300 × 5 mm boards with a density of 0.8 g/cm³.
2
Heat treatment of rice-straw chips or powder at 200 °C and 1.5 MPa for more than 40 minutes increased the boards’ internal bonding strength.
3
Rice straw can be converted into environmentally friendly binderless boards without synthetic resins, addressing agricultural-waste utilization.
4
The improved self-bonding was attributed to physical and chemical changes in the rice straw caused by heat treatment.
5
The study investigated heat-treatment effects using mechanical and physical testing alongside SEM, particle-size distribution, and GC-MS analyses.
Research Object
binderless boards manufactured from heat-treated rice straw
Research Subject
the effect of heat treatment on the boards’ self-bonding properties, including internal bonding and associated physical and chemical changes in the rice straw
Publication Details
Publication Date
2022-07-01
Journal
Publisher
ISSN
Cited by
3
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest