Measurements of air pollution emission factors for marine transportation in SECA
Измерение коэффициентов выбросов загрязняющих веществ в атмосферу морским транспортом в SECA
2013-07-24
SCID: 54.1/thetge3f
Discuss with AI
aerosol particle numbermarine transportationparticulate sulphateship emission factorssulphur emission control areas
Figures from the paper
Abstract (AI)
Abstract. The chemical composition of the plumes of seagoing ships was measured during a two week long measurement campaign in the port of Rotterdam, Hoek van Holland The Netherlands, in September 2009. Altogether, 497 ships were monitored and a statistical evaluation of emission factors (g kg−1 fuel) was provided. The concerned main atmospheric components were SO2, NO2, NOx and the aerosol particle number. In addition, the elemental and water-soluble ionic composition of the emitted particulate matter was determined. Emission factors were expressed as a function of ship type, power and crankshaft rotational speed. The average SO2 emission factor was found to be roughly half of what is allowed in sulphur emission control areas (16 vs. 30 g kg−1 fuel), and exceedances of this limit were rarely registered. A significant linear relationship was observed between the SO2 and particle number emission factors. The intercept of the regression line, 4.8 × 1015 (kg fuel)−1, gives the average number of particles formed during the burning of 1 kg zero sulphur content fuel, while the slope, 2 × 1018, provides the average number of particles formed with 1 kg sulphur burnt with the fuel. Water-soluble ionic composition analysis of the aerosol samples from the plumes showed that ~144 g of particulate sulphate was emitted from 1 kg sulphur burnt with the fuel. The mass median diameter of sulphate particles estimated from the measurements was ~42 nm.
Key Findings
1
A two-week Rotterdam campaign monitored 497 ships and quantified emission factors for SO₂, NO₂, NOₓ, aerosol particles, and particulate composition.
2
Approximately 144 g of particulate sulfate was emitted per kilogram of sulfur burned, with an estimated sulfate-particle mass median diameter of about 42 nm.
3
SO₂ and particle-number emission factors showed a significant linear relationship, indicating sulfur-dependent particle formation.
4
The average SO₂ emission factor was approximately 16 g kg⁻¹ fuel, about half the SECA limit of 30 g kg⁻¹; exceedances were rare.
5
The regression intercept estimated 4.8 × 10¹⁵ particles kg⁻¹ from zero-sulfur fuel, while the slope estimated 2 × 10¹⁸ particles per kilogram of sulfur burned.
Research Object
Seagoing ship emission plumes in the Sulphur Emission Control Area (SECA)
Research Subject
Atmospheric emission factors, chemical composition, and particle formation relationships as functions of ship type, engine power, and crankshaft rotational speed
Publication Details
Publication Date
2013-07-24
Journal
Publisher
ISSN
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest