Rockfall Analysis from UAV-Based Photogrammetry and 3D Models of a Cliff Area
Анализ камнепадов с использованием фотограмметрии на основе БПЛА и трёхмерных моделей участка обрыва
2024-01-22
SCID: 54.1/tjfms4hq
Discuss with AI
3D cliff modelsUAV photogrammetrydiscontinuity mappingkinematic failure analysisrockfall analysis
Figures from the paper
Abstract (AI)
The application of Unmanned Aerial Vehicles (UAVs), commonly known as drones, in geological, geomorphological, and geotechnical studies has gained significant attention due to their versatility and capability to capture high-resolution data from challenging terrains. This research uses drone-based high-resolution photogrammetry to assess the geomechanical properties and rockfall potential of several rock scarps within a wide area of 50 ha. Traditional methods for evaluating geomechanical parameters on rock scarps involve time-consuming field surveys and measurements, which can be hazardous in steep and rugged environments. By contrast, drone photogrammetry offers a safer and more efficient approach, allowing for the creation of detailed 3D models of a cliff area. These models provide valuable insights into the topography, geological structures, and potential failure mechanisms. This research processed the acquired drone imagery using advanced geospatial software to generate accurate orthophotos and digital elevation models. These outputs analysed the key factors contributing to rockfall triggering, including identifying discontinuities, joint orientations, kinematic analysis of failures, and fracturing frequency. More than 8.9 × 107 facets, representing discontinuity planes, were recognised and analysed for the kinematic failure modes, showing that direct toppling is the most abundant rockfall type, followed by planar sliding and flexural toppling. Three different fracturation grades were also identified based on the number of planar facets recognised on rock surfaces. The approach used in this research contributes to the ongoing development of fast, practical, low-cost, and non-invasive techniques for geomechanical assessment on vertical rock scarps. In particular, the results show the effectiveness of drone-based photogrammetry for rapidly collecting comprehensive geomechanical data valid to recognise the prone areas to rockfalls in vast regions.
Key Findings
1
Direct toppling was the most abundant rockfall mechanism, followed by planar sliding and flexural toppling.
2
Drone-based high-resolution photogrammetry enabled safer and more efficient geomechanical assessment of multiple rock scarps across a 50-ha area.
3
More than 8.9 × 10^7 discontinuity-plane facets were recognized and analyzed for potential kinematic failure modes.
4
The resulting 3D models, orthophotos, and digital elevation models supported analysis of discontinuities, joint orientations, failure kinematics, and fracturing frequency.
5
Three fracturation grades were identified from the number of planar facets on rock surfaces, demonstrating the method’s utility for rapidly locating rockfall-prone areas over large regions.
Research Object
rock scarps within a 50-ha cliff area
Research Subject
geomechanical properties and rockfall potential, including discontinuity characteristics, kinematic failure modes, and fracturing frequency
Publication Details
Publication Date
2024-01-22
Journal
Publisher
ISSN
Cited by
62
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest