Influence of gas flow rate and surfactant concentration on SDBS foam properties
Влияние скорости подачи газа и концентрации поверхностно-активного вещества на свойства пен SDBS
2018-12-04
SCID: 54.1/tqhsn52h
Discuss with AI
SDBS foamcritical micelle concentrationfoam stabilitygas flow ratesurfactant concentration
Figures from the paper
Abstract (AI)
Foams stabilized by surfactants are widely applied in many industrial practices; thus, the investigation of properties of these foams is of significance. The aim of this study is to examine the influence of gas flow rate and surfactant concentration on properties of foams stabilized by sodium dodecyl benzene sulfonate (SDBS). Experiments were conducted using a commercially available instrument, FoamScan, with which the foamability, foam stability, bubble size, and liquid content of foam were determined. The results showed that as an increase in gas flow rate at the same surfactant concentration the foaming time decreased while the liquid content of foam increased. On the other hand, increasing the surfactant concentration at a desired gas flow rate, the foam properties (both foamability and foam stability) of SDBS increased at concentrations c < critical micelle concentration (cmc), but this effect did not scale linearly with concentration. When c ≥ cmc, there was no evident change in both foamability and foam stability. Moreover, foam stability was controlled not only by foam drainage process but also by bubble coalescence. These findings provide guidelines for generating foams with excellent properties suitable for specific foam applications by adjusting the gas flow rate and surfactant concentration.
Key Findings
1
Adjusting gas flow rate and SDBS concentration provides a way to tailor foam properties for specific applications.
2
At or above the critical micelle concentration, further SDBS concentration increases produced no evident changes in foamability or foam stability.
3
Below the critical micelle concentration, increasing SDBS concentration improved foamability and foam stability, but nonlinearly.
4
Foam stability was governed by both liquid drainage and bubble coalescence, rather than drainage alone.
5
Increasing gas flow rate at fixed SDBS concentration shortened foaming time and increased the foam’s liquid content.
Research Object
SDBS-stabilized foams
Research Subject
The effects of gas flow rate and surfactant concentration on foamability, foam stability, bubble size, liquid content, drainage, and bubble coalescence
Publication Details
Publication Date
2018-12-04
Journal
Publisher
ISSN
Access Type
Author Information
Download PDF
Subscribe to digest