Mediatorless high-power glucose biofuel cells based on compressed carbon nanotube-enzyme electrodes
Безмедиаторные высокомощные глюкозные биотопливные элементы на основе электродов из прессованных углеродных нанотрубок с ферментами
2011-06-28
SCID: 54.1/tt5mpmn8
Discuss with AI
carbon nanotube-enzyme electrodesglucose biofuel cellsglucose oxidaselaccasemediatorless bioelectrochemical cells
Figures from the paper
Abstract (AI)
Enzymatic fuel cells use enzymes to produce energy from bioavailable substrates. However, such biofuel cells are limited by the difficult electrical wiring of enzymes to the electrode. Here we show the efficient wiring of enzymes in a conductive pure carbon nanotube matrix for the fabrication of a glucose biofuel cell (GBFC). Glucose oxidase and laccase were respectively incorporated in carbon nanotube disks by mechanical compression. The characterization of each bioelectrode shows an open circuit potential corresponding to the redox potential of the respective enzymes, and high current densities for glucose oxidation and oxygen reduction. The mediatorless GBFC delivers a high power density up to 1.3 mW cm−2 and an open circuit voltage of 0.95 V. Moreover, the GBFC remains stable for 1 month and delivers 1 mW cm−2 power density under physiological conditions (5×10−3 mol l−1 glucose, pH 7). To date, these values are the best performances obtained for a GBFC. Glucose biofuel cells can be used to produce clean energy from renewable sources, but their use is limited by poor stability and low power output. In this study, bioelectrodes are fabricated using carbon nanotubes and the resulting biofuel cells have improved stability and power.
Key Findings
1
Glucose oxidase and laccase were mechanically compressed into conductive pure carbon nanotube disks, enabling efficient mediatorless enzyme–electrode wiring.
2
The biofuel cell remained stable for one month, addressing the poor stability characteristic of many glucose biofuel cells.
3
The reported power density, voltage, and stability were stated to be the best performances obtained for a glucose biofuel cell at the time.
4
The resulting glucose biofuel cell achieved a maximum power density of 1.3 mW cm−2 with an open-circuit voltage of 0.95 V.
5
Under physiological conditions with 5×10−3 mol l−1 glucose at pH 7, the cell delivered 1 mW cm−2 power density.
Research Object
mediatorless glucose biofuel cells based on compressed carbon nanotube–enzyme electrodes
Research Subject
enzyme electrical wiring and the resulting power output, stability, and electrochemical performance under physiological conditions
Publication Details
Publication Date
2011-06-28
Journal
Publisher
ISSN
Cited by
615
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest