Experimental Study on the Effect of Humidity on the Mechanical Properties of 3D-Printed Mechanical Metamaterials

Shuai Li, Christoph Eberl, Zeeshan Ali, Qian Sun, Xiaojun Tan, J. de Man, Kaiyang Yin, Bo Cao, Jianhao Man
2025-11-03

Poisson's ratiofused filament fabricationhumidity effectsmechanical metamaterialswater absorption stages
In this study, six common fused filament fabrication (FFF) polymers-PEEK, PLA, PETG, ABS, Nylon, and TPU-were acclimatized at 15%, 45%, and 95% relative humidity (RH) to characterize tensile behavior, including Young's modulus, maximum strain, and ultimate tensile strength. Separately, mechanical metamaterial samples at relative densities (RD) of 25%, 35%, and 45% were tested in compression at the same RH levels to evaluate stiffness, strength, and Poisson's ratio. The water absorption process can generally be divided into different stages-rapid uptake (0-12 h), a plateau (12-60 h), and a late rebound (60-100 h)-with a total uptake ranking of Nylon > PETG > PLA ≈ ABS > TPU ≈ PEEK. Samples under tensile and compressive tests show a great difference between properties at different RD and RH levels. Poisson's ratio indicates that material responses remain predictable at low-to-moderate RH, whereas high RH serves as a critical threshold inducing abrupt Poisson's ratio behavioral shifts. This study provides systematic validation for the application of 3D-printed metamaterials under varying humidity conditions, such as biomedical implants in human body.
1
Poisson's ratio remains predictable at low-to-moderate RH but undergoes abrupt behavioral shifts at high RH, indicating a critical humidity threshold.
2
Results systematically validate considerations for using 3D-printed metamaterials under varying humidity, including biomedical implant applications.
3
Six common FFF polymers (PEEK, PLA, PETG, ABS, Nylon, TPU) were acclimatized at 15%, 45%, and 95% RH to characterize tensile behavior and mechanical properties.
4
Tensile and compressive properties vary substantially with relative density (25%, 35%, 45%) and humidity level.
5
Total water uptake ranking: Nylon > PETG > PLA ≈ ABS > TPU ≈ PEEK.
6
Water absorption follows stages: rapid uptake (0–12 h), plateau (12–60 h), and late rebound (60–100 h).
Publication Details
Publication Date
2025-11-03
Journal
Publisher
ISSN
Cited by
9
Access Type
Author Information
Authors
Shuai Li
Christoph Eberl
Zeeshan Ali
Qian Sun
Xiaojun Tan
J. de Man
Kaiyang Yin
Bo Cao
Jianhao Man
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%