A study of laser cladding NiCrBSi/Mo composite coatings

Исследование композиционных покрытий NiCrBSi/Mo, нанесённых методом лазерной наплавки
Hanguang Fu, Yulong Li, W. Kaiming, L. Yongping, Su Zhen-qing, M. Pengfei
2016-12-31

42CrMo steelNiCrBSi/Mo composite coatingslaser claddingmicrohardnesswear resistance
Laser cladding Ni-based composite coating was fabricated on the surface of 42CrMo steel using 6 kW fibre laser. By the addition of Mo powder, a well-formed and crack-free laser cladding composite coating was obtained. The morphology, composition, microhardness and wear resistance of composite coatings were studied using a scanning electron microscopy, an energy-dispersive spectroscopy, an X-ray diffraction spectrum, a microhardness tester and a wear tester. The results show that the cladding layer has metallurgical bonding with the substrate. The main phases of Ni45 + 10%Mo laser cladding layer are (Fe, Ni), Cr23C6, Cr3C2, Mo2FeB2 and Cr2B3. After the addition of Mo powder, the size of the microstructure of composite coatings is finer than that of Ni45 cladding layer. Stubby-rod carbides are displayed in the interdendritic interface. The molybdenum and chromium are rich in the grain boundaries. The distribution of hardness is uniform in Ni-based cladding layer, and its microhardness is significantly higher than that of the substrate. Ni45 + 10%Mo composite coating has the best wear resistance. Its wear resistance reaches 1.734 times of Ni45 coating and 2.367 times of 42CrMo steel.
1
Adding Mo powder during 6 kW fibre-laser cladding produced a well-formed, crack-free Ni-based composite coating on 42CrMo steel.
2
Mo addition generated stubby-rod carbides at interdendritic regions and enriched molybdenum and chromium at grain boundaries.
3
Ni45 + 10%Mo showed the best wear resistance, reaching 1.734 times that of Ni45 coating and 2.367 times that of 42CrMo steel.
4
The Ni45 + 10%Mo coating contained (Fe, Ni), Cr23C6, Cr3C2, Mo2FeB2, and Cr2B3 phases, with finer microstructure after Mo addition.
5
The cladding layer formed a metallurgical bond with the 42CrMo substrate and exhibited uniformly distributed hardness substantially higher than the substrate.

laser-cladded NiCrBSi/Mo composite coatings on 42CrMo steel

the effects of Mo addition on the microstructure, phase composition, microhardness, metallurgical bonding, and wear resistance of the composite coatings

Publication Details
Publication Date
2016-12-31
Journal
Publisher
ISSN
Cited by
63
Access Type
Author Information
Authors
Hanguang Fu
Yulong Li
W. Kaiming
L. Yongping
Su Zhen-qing
M. Pengfei
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%