In-Situ combustion simulation for enhanced oil recovery.
Моделирование внутрипластового горения для повышения нефтеотдачи
1984-01-01
SCID: 54.1/vs96fkgv
Discuss with AI
air injectionenhanced oil recoveryin-situ combustionthermal chemical reactionsthree-phase reservoir model
Figures from the paper
Abstract (AI)
Oil recovery by in-situ combustion involves igniting the oil in the formation and driving the combustion front through the formation by means of air injection, while very complicated chemical reactions occur during in-situ combustion processes. The difficulty of modeling the in-situ combustion processes is chiefly due to the complexity of chemical reactions, effects of temperature on physical properties, the large number of the components and the change of oil and water phases.The main objective of this study is to develop an in-situ combustion model and to check is efficiency. A one-dimensional, three-phase in-situ combustion reservoir model simulates fluid flow, heat transfer, vaporization/condensation, and chemical reactions. The developed model has seven components: oxygen, nitrogen, combination of carbon dioxide and carbon monoxide, light hydrocarbon, heavy hydrocarbon, water, and coke.Some example calculations are presented. In spite of a simplification of thermal and physical mechanism, the applications show that the model can be used to interpret laboratory results and to predict insitu combustion processes when some parameters are varied.
Key Findings
1
A one-dimensional, three-phase in-situ combustion reservoir model was developed to simulate fluid flow, heat transfer, phase changes, and chemical reactions.
2
Example calculations indicate that, despite simplified thermal and physical mechanisms, the model can interpret laboratory results.
3
The model can predict in-situ combustion behavior under varied parameter conditions, supporting enhanced oil recovery analysis.
4
The model incorporates vaporization and condensation alongside combustion reactions and temperature-dependent reservoir behavior.
5
The model represents seven components: oxygen, nitrogen, combined carbon dioxide and carbon monoxide, light hydrocarbons, heavy hydrocarbons, water, and coke.
Research Object
one-dimensional, three-phase in-situ combustion reservoir system during enhanced oil recovery
Research Subject
fluid flow, heat transfer, phase changes, and chemical reactions governing in-situ combustion processes and their modeling efficiency
Publication Details
Publication Date
1984-01-01
Journal
Publisher
ISSN
Cited by
2
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest