One- and Three-Dimensional Growth of Hydroxyapatite Nanowires during Sol–Gel–Hydrothermal Synthesis
Одно- и трехмерный рост нанопроволок гидроксиапатита при золь–гель–гидротермальном синтезе
2012-02-01
SCID: 54.1/wh6ej9ug
Discuss with AI
amorphous calcium phosphatebone tissue engineeringhydroxyapatite nanowirespoly(ε-caprolactone)/hydroxyapatite compositessol-gel-hydrothermal synthesis
Figures from the paper
Abstract (AI)
Nanoscale hydroxyapatite (HA) is an optimal candidate biomaterial for bone tissue engineering because of its bioactive and osteoconductive properties. In this study, micro- and nanoscale HA particles with rod- and wirelike morphology were synthesized by a novel sol-gel-hydrothermal process. Sol-gel chemistry was used to produce a dry gel containing amorphous calcium phosphate (ACP), which was used as a precursor material in a hydrothermal process. The sol-gel-hydrothermal products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) to determine particle morphology, crystal structure, and the presence of chemical functional groups. A pure HA crystal was synthesized, which underwent both one- and three-dimensional growth, resulting in tunable microrod and nanorod, and wire morphologies. The effects of solution pH and reaction time on particle diameter and length were assessed. Particle diameter ranged from 25 to 800 nm and decreased with an increase in solution pH, whereas both particle length and diameter increased as the hydrothermal process was prolonged. Nanowire HA powders (10-50 wt %) were mixed with poly(ε-caprolactone) (PCL) to produce PCL/HA composites. Fracture surfaces of PCL/HA composites showed a well-dispersed and homogeneous distribution of HA nanowires within the PCL matrix. Mechanical testing revealed a significant (p < 0.05) increase in the Young's and compressive moduli of PCL/HA composites compared to PCL alone, with 50 wt % HA producing a 3-fold increase in Young's modulus from 193 to 665 MPa and 2-fold increase in compressive modulus from 230 to 487 MPa. These HA nanowires can be used to reinforce polymer composites and are excellent biomaterials for tissue engineering of bone.
Key Findings
1
A novel sol–gel–hydrothermal process synthesized pure hydroxyapatite with tunable microrod, nanorod, and nanowire morphologies.
2
Adding 50 wt% hydroxyapatite increased Young’s modulus from 193 to 665 MPa and compressive modulus from 230 to 487 MPa.
3
Hydroxyapatite nanowires were homogeneously dispersed in poly(ε-caprolactone) composites, enabling effective polymer reinforcement.
4
Hydroxyapatite particles exhibited one- and three-dimensional growth, with diameters ranging from 25 to 800 nm.
5
Increasing solution pH decreased particle diameter, whereas longer hydrothermal reaction times increased both particle length and diameter.
Research Object
Hydroxyapatite (HA) nanowires and microrod/nanorod particles synthesized by a sol–gel–hydrothermal process, including their PCL/HA composites
Research Subject
One- and three-dimensional crystal growth and morphology control of HA particles, and the mechanical reinforcement of PCL composites by HA nanowires
Publication Details
Publication Date
2012-02-01
Journal
Publisher
ISSN
Cited by
168
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai2
Cited by4
Controlled Synthesis of Hydroxyapatite Nanomaterials Regulated by Different Phosphorus Sources2020
Highly porous ceramics based on ultralong hydroxyapatite nanowires2016
Large-Scale Automated Production of Highly Ordered Ultralong Hydroxyapatite Nanowires and Construction of Various Fire-Resistant Flexible Ordered Architectures2016
Natural‐Based Nanocomposites for Bone Tissue Engineering and Regenerative Medicine: A Review2015