Experimental Study and Molecular Simulation of the Effect of Temperature on the Stability of Surfactant Foam
Экспериментальное исследование и молекулярное моделирование влияния температуры на стабильность пены, содержащей поверхностно-активное вещество
2023-03-08
SCID: 54.1/xswvdf9b
Discuss with AI
CO2 foam fracturingfoam half-lifeinterfacial free energyself-diffusion coefficientsurfactant foam stability
Figures from the paper
Abstract (AI)
Temperature changes in CO2 foam-fracturing construction can easily affect surfactant foam stability. To investigate the effect of temperature on the foam stability of different types of surfactants, this study measured the foam half-life and viscosity of four typical surfactants, CTAB, LAS-30, HSB1214, and TX-10, using a novel self-designed and built foam performance measurement device. The effects of temperature on foam half-life and viscosity were studied. The results show that as the temperature increased, the half-life shortened, and the viscosity of the liquid phase decreased, which led to a decrease in foam stability. Moreover, using Materials Studio, a type of molecular simulation software, an interfacial model of the foam film was constructed to calculate the IFE and the self-diffusion coefficient of water molecules at 300 ps after the equilibrium of the foam system to investigate the mechanism of temperature influence on the stability of the foam. The results show that, for CTAB, LAS-30, HSB1214, and TX-10, the temperature increases from 15 °C to 45 °C, the IFE is enhanced by −50.05%, −59.10%, −64.21%, and −44.26%, respectively, the interfacial system changes from a low-energy state to a high-energy state, and the interfacial stability decreases. Meanwhile, Dwater increased 1.10-fold, 0.78-fold, 1.43-fold, and 0.64-fold, respectively, which accelerated the diffusion and migration of water molecules, weakened the intermolecular forces, and accelerated the instability of the foam system.
Key Findings
1
Experiments on CTAB, LAS-30, HSB1214, and TX-10 used a newly designed foam-performance measurement device to quantify temperature effects.
2
From 15 °C to 45 °C, the interfacial free energy increased by −50.05%, −59.10%, −64.21%, and −44.26% for CTAB, LAS-30, HSB1214, and TX-10, respectively, indicating a transition toward higher-energy, less stable interfaces.
3
Increasing temperature shortens foam half-life and decreases liquid-phase viscosity, thereby reducing surfactant foam stability.
4
Molecular simulations indicate that temperature-induced changes in interfacial energy and water diffusion accelerate foam-film destabilization.
5
Over the same temperature range, water self-diffusion coefficients changed by 1.10-fold, 0.78-fold, 1.43-fold, and 0.64-fold, respectively, promoting water migration and weakening intermolecular forces.
Research Object
CO2 foam-fracturing surfactant foams formed by CTAB, LAS-30, HSB1214, and TX-10
Research Subject
The effects of temperature from 15 °C to 45 °C on foam stability, including foam half-life, liquid-phase viscosity, interfacial free energy, and water-molecule self-diffusion
Publication Details
Publication Date
2023-03-08
Journal
Publisher
ISSN
Cited by
20
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest