Sensitive and Stable Tin–Lead Hybrid Perovskite Photodetectors Enabled by Double‐Sided Surface Passivation for Infrared Upconversion Detection
Чувствительные и стабильные гибридные оловянно-свинцовые перовскитные фотодетекторы с двусторонней поверхностной пассивацией для детектирования инфракрасного излучения с преобразованием частоты
2020-05-17
SCID: 54.1/y3jy5xg7
Discuss with AI
Sn–Pb hybrid perovskitesbroadband photodetectorsdouble-sided surface passivationinfrared upconversionphenethylammonium iodide (PEAI)
Figures from the paper
Abstract (AI)
Abstract Tin(Sn)‐based perovskite is currently considered one of the most promising materials due to extending the absorption spectrum and reducing the use of lead (Pb). However, Sn2+ is easily oxidized to Sn4+ in atmosphere, causing more defects and degradation of perovskite materials. Herein, double‐sided interface engineering is proposed, that is, Sn‐Pb perovskite films are sandwiched between the phenethylammonium iodide (PEAI) in both the bottom and top sides. The larger organic cations of PEA+ are arranged into a perovskite surface lattice to form a 2D capping layer, which can effectively prevent the water and oxygen to destroy bulk perovskite. Meanwhile, the PEA+ can also passivate defects of iodide anions at the bottom of perovskite films, which is always present but rarely considered previously. Compared to one sided passivation, Sn‐Pb hybrid perovskite photodetectors contribute a significant enhancement of performance and stability, yielding a broadband response of 300–1050 nm, a low dark current density of 1.25 × 10–3 mA cm–2 at –0.1 V, fast response speed of 35 ns, and stability beyond 240 h. Furthermore, the Sn‐Pb broadband photodetectors are integrated in an infrared up‐conversion system, converting near‐infrared light into visible light. It is believed that a double‐sided passivation method can provide new strategies to achieving high‐performance perovskite photodetectors.
Key Findings
1
Compared with one-sided passivation, double-sided engineering significantly improves Sn–Pb photodetector performance and stability.
2
Double-sided phenethylammonium iodide passivation sandwiches Sn–Pb perovskite films, forming a 2D surface capping layer and passivating bottom-interface iodide defects.
3
The PEA+ capping layer suppresses water and oxygen penetration, while bottom-side passivation addresses defects often overlooked in conventional one-sided treatments.
4
The devices maintain stability beyond 240 h and enable near-infrared-to-visible-light up-conversion detection.
5
The photodetectors provide broadband detection from 300–1050 nm, a dark current density of 1.25 × 10–3 mA cm–2 at −0.1 V, and a 35 ns response speed.
Research Object
Double-sided PEAI-passivated Sn–Pb hybrid perovskite photodetectors for infrared upconversion detection
Research Subject
Broadband photodetection performance and operational stability, including defect passivation, suppression of Sn2+ oxidation and environmental degradation, response speed, dark current, and near-infrared-to-visible upconversion
Publication Details
Publication Date
2020-05-17
Journal
Publisher
ISSN
Cited by
130
Access Type
Author Information
Download PDF
Subscribe to digest