Mechanical properties of cellulose aerogels and cryogels

Механические свойства целлюлозных аэрогелей и криогелей
Nela Buchtová, Tatiana Budtova, Christophe Pradille, Jean‐Luc Bouvard
2019-01-01

cellulose aerogelscellulose cryogelsfreeze-dryingsupercritical CO2 dryinguniaxial compression
Highly porous and lightweight cellulose materials were prepared via dissolution-coagulation and different drying routes. Cellulose of three different molecular weights was dissolved in an ionic liquid/dimethyl sulfoxide mixture. Drying was performed either with supercritical CO2 resulting in "aerogels", or via freeze-drying resulting in "cryogels". The influence of cellulose molecular weight, concentration and drying method on the morphology, density, porosity and specific surface area was determined. The mechanical properties of cellulose cryogels and aerogels under uniaxial compression were studied in detail and analyzed in the view of existing models developed for porous materials. It was demonstrated that the Poisson's ratio of cellulose aerogels is not equal to zero, contrary to what is usually reported in the literature, but decreases with an increase in density. Compressive modulus and yield stress of cryogels turned out to be higher than those of aerogels taken at the same density. This was interpreted by the different morphology of the porous materials studied.
1
At equal density, cellulose cryogels exhibit higher compressive modulus and yield stress than cellulose aerogels.
2
Cellulose aerogels have a nonzero Poisson’s ratio, contrary to common literature reports, and this ratio decreases as density increases.
3
Cellulose molecular weight, solution concentration, and drying route were shown to influence morphology, density, porosity, and specific surface area.
4
Highly porous cellulose aerogels and cryogels were produced by dissolving cellulose in an ionic liquid/dimethyl sulfoxide mixture and applying supercritical-CO2 or freeze-drying.
5
The superior compressive performance of cryogels was attributed to morphological differences between freeze-dried and supercritically dried porous structures.

Cellulose aerogels and cryogels

The effects of cellulose molecular weight, concentration, and drying method on the morphology, structure, and uniaxial compressive mechanical properties of porous cellulose materials, including Poisson’s ratio, compressive modulus, and yield stress

Publication Details
Publication Date
2019-01-01
Journal
Publisher
ISSN
Cited by
142
Access Type
Author Information
Authors
Nela Buchtová
Tatiana Budtova
Christophe Pradille
Jean‐Luc Bouvard
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%