Formation of Titanium Oxide Nanotube

Формирование нанотрубок из оксида титана
Koichi Niihara, Tohru Sekino, Tomoko Kasuga, Masayoshi Hiramatsu, Akihiko Hoson
1998-05-23

TiO2 anatasealkaline hydrothermal treatmentsol-gel synthesisspecific surface areatitanium oxide nanotubes
Nanotubes composed of various materials such as carbon, boron nitride, and oxides have been studied recently. In this report, the discovery of a new route for the synthesis of a nanotube made of titanium oxide is presented. Needle-shaped TiO 2 crystals (anatase phase) with a diameter of ≈8 nm and a length of ≈100 nm were obtained when sol−gel-derived fine TiO 2 -based powders were treated chemically (e.g., for 20 h at 110 °C) with a 5−10 M NaOH aqueous solution. It was found by observation using a transmission electron microscope that the needle-shaped products have a tube structure. The TiO 2 nanotubes have a large specific surface area of ≈400 m 2 ·g -1 . TiO 2 nanotubes obtained in the present work are anticipated to have great potential for use in the preparation of catalysts, adsorbants, and deodorants with high activities, because their specific surface area is greatly increased. If metallic-, inorganic-, or organic-based materials can be inserted into the TiO 2 nanotubes, novel characteristics such as electric, electromagnetic, or chemical properties may be induced in the TiO 2 materials.
1
A new chemical route synthesized titanium oxide nanotubes from sol–gel-derived fine TiO₂ powders using concentrated aqueous NaOH treatment.
2
The TiO₂ nanotubes exhibited a large specific surface area of approximately 400 m²·g⁻¹.
3
The process produced anatase-phase, needle-shaped TiO₂ nanotubes approximately 8 nm in diameter and 100 nm in length.
4
Their high surface area suggests potential applications in highly active catalysts, adsorbents, and deodorants; material insertion could introduce additional electrical, electromagnetic, or chemical properties.
5
Transmission electron microscopy confirmed that the needle-shaped TiO₂ products possess hollow tube structures.

TiO₂ nanotubes synthesized from sol–gel-derived TiO₂-based powders by chemical treatment in aqueous NaOH

The synthesis route, tubular morphology, and high specific surface area of TiO₂ nanotubes

Publication Details
Publication Date
1998-05-23
Journal
Publisher
ISSN
Cited by
2697
Access Type
Author Information
Authors
Koichi Niihara
Tohru Sekino
Tomoko Kasuga
Masayoshi Hiramatsu
Akihiko Hoson
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%