Impact of processing parameters on the compatibility and performance of PLA/tapioca starch biocomposites for short-term food packaging applications
Влияние параметров переработки на совместимость и эксплуатационные характеристики биокомпозитов на основе ПЛА и тапиокового крахмала для краткосрочной упаковки пищевых продуктов
2025-01-19
SCID: 54.1/2z2zrqw4
Discuss with AI
PLA/tapioca starch biocompositesbiodegradationfood packaginginjection molding parametersresponse surface methodology
Figures from the paper
Abstract (AI)
Polylactic acid (PLA) and tapioca starch biocomposites offer a sustainable alternative to petroleum-based plastics for single-use packaging. This study focused on optimizing injection molding parameters for a novel PLA/tapioca starch blend using response surface methodology (RSM). Injection temperature had the most significant impact on tensile strength . The optimal parameters identified were injection temperature of 181°C, pressure of 40 MPa, and speed of 300 mm/s, achieving a tensile strength of 25.34 MPa without defects. Morphological analysis revealed smoother fracture surfaces and presence of microfibrils denoting increased ductility. Mechanical properties, including 16 % elongation, 24.5 MPa flexural strength , and 9.32 kJ/m² impact strength , were comparable to conventional plastics. Enhanced biodegradation in ambient soil conditions was observed, while migration tests showed no leaching in most stimulants, supporting its potential for sustainable packaging applications.
Key Findings
1
Injection temperature was the most influential processing parameter affecting the tensile strength of PLA/tapioca starch biocomposites.
2
Response surface methodology identified optimal injection molding conditions of 181°C temperature, 40 MPa pressure, and 300 mm/s speed.
3
Smoother fracture surfaces and microfibrils indicated increased ductility, while soil biodegradation and minimal stimulant migration supported short-term food-packaging potential.
4
The biocomposite exhibited 16% elongation, 24.5 MPa flexural strength, and 9.32 kJ/m² impact strength, comparable to conventional plastics.
5
The optimized process produced defect-free specimens with 25.34 MPa tensile strength.
Research Object
PLA/tapioca starch biocomposites produced by injection molding for short-term food packaging
Research Subject
The effects of injection-molding parameters on the compatibility, mechanical performance, morphology, biodegradation, and migration behavior of the biocomposites
Publication Details
Publication Date
2025-01-19
Journal
Publisher
ISSN
Cited by
9
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai3
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications2021
Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging2017
Characterization of interfacial properties between fibre and polymer matrix in composite materials – A critical review2021