Self‐Lubricating Physical Vapor Deposition Coatings for Dry Cold Massive Forming
Самосмазывающиеся покрытия, нанесённые методом физического осаждения из паровой фазы, для сухой холодной объёмной штамповки
2019-12-03
SCID: 54.1/5ghwsgp5
Discuss with AI
(Cr,Al)N + Mo:Sdry cold formingphysical vapor deposition (PVD)self-lubricating hard coatingstribological behavior
Figures from the paper
Abstract (AI)
Cold massive forming, particularly forward extrusion of steel, is characterized by high material utilization, product quality, and resource efficiency. Currently, enormous quantities of mostly ecologically harmful lubricants are required, leading to the demand for lubricant‐free cold forming. Furthermore, cost savings are achievable due to shorter lead times. However, the requirements for the tools cannot be met without the application of wear‐resistant and friction‐reducing hard coatings. The self‐lubricating hard coatings (Cr,Al)N + Mo:S and (Cr,Al)N + W:S with attuned material design deposited by physical vapor deposition (PVD) offer high potential for the realization of dry cold forming of steel. The process chain for the comprehensive characterization of the developed coating systems comprises analyses of coating and compound properties as well as two different model tests to determine the tribological behavior. One of the used tribometers represents an open tribological system, which is particularly suitable for simulating the loads occurring during cold massive forming of steel. The analyses reveal that with Mo and S modified coatings exhibit higher potential for ecologically sustainable cold forming due to their better mechanical properties and compound properties between the coatings and the cold work steel substrate compared with W and S modified coatings.
Key Findings
1
A comprehensive characterization process evaluates coating properties, coating–substrate compound properties, and tribological behavior using two model tests.
2
An open tribological system is used to simulate loads relevant to cold massive forming of steel.
3
Lubricant-free cold massive forming of steel requires wear-resistant, friction-reducing hard coatings because conventional lubricants are ecologically harmful.
4
Mo- and S-modified coatings show greater potential for sustainable cold forming than W- and S-modified coatings because of superior mechanical and coating–substrate compound properties.
5
PVD-deposited (Cr,Al)N + Mo:S and (Cr,Al)N + W:S coatings are identified as promising self-lubricating systems for dry cold forming.
Research Object
Self-lubricating (Cr,Al)N + Mo:S and (Cr,Al)N + W:S hard PVD coatings on cold-work steel tools for dry cold massive forming of steel
Research Subject
The coatings’ mechanical, compound, and tribological properties and their potential to reduce friction and wear in lubricant-free cold forming
Publication Details
Publication Date
2019-12-03
Journal
Publisher
ISSN
Cited by
6
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest