Crystalline structure of annealed polylactic acid and its relation to processing
Кристаллическая структура отожженной полимолочной кислоты и ее связь с переработкой
2010-01-01
SCID: 54.1/6dq7uh82
Discuss with AI
crystalline structuredifferential scanning calorimetryinjection moldingpoly(lactic acid)wide-angle X-ray diffraction
Figures from the paper
Abstract (AI)
This paper focuses on the crystalline structure of injection moulding grade poly(lactic acid) (PLA) and the effect of crystalline structure on the processing.The research is induced by the significant differences in crystallinity of the pure PLA resin, and the injection moulded product, and thus the reprocessing of PLA products.2 mm thick PLA sheets were injection moulded and re-crystallized in a conventional oven at 60-140°C, for 10-60 minutes to achieve various crystalline contents.The properties of these sheets were investigated by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and wide angle X-ray diffraction (WAXD).In a processing plant the rejected parts are recycled and reused as raw material for further cycles, accordingly the various crystalline content PLA products were reprocessed as a resin, to investigate the processing itself.When PLA products are reprocessed, due to the adherent feature of amorphous PLA processing difficulties may occur.This adherent effect of the amorphous PLA was investigated and characterized.
Key Findings
1
Amorphous PLA exhibits an adherent effect that can cause processing difficulties during reprocessing, which the study characterizes.
2
Injection-moulded PLA sheets were re-crystallized at 60–140°C for 10–60 minutes to generate materials with varied crystalline contents.
3
PLA products with different crystalline contents were reprocessed to assess processing behavior during recycling and reuse.
4
The crystalline structures and properties of PLA were characterized using dynamic mechanical analysis, differential scanning calorimetry, and wide-angle X-ray diffraction.
5
The study examines how differences between the crystallinity of pure PLA resin and injection-moulded products influence PLA reprocessing.
Research Object
Annealed and reprocessed injection-moulded polylactic acid (PLA) sheets/products with varying crystalline contents
Research Subject
The relationship between PLA crystalline structure and processing, including the processing difficulties caused by the adhesion of amorphous PLA
Publication Details
Publication Date
2010-01-01
Journal
Publisher
ISSN
Cited by
325
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest