Critical parameters controlling the properties of monolithic poly(lactic acid) foams prepared by thermally induced phase separation

Критические параметры, определяющие свойства монолитных пен из поли(молочной кислоты), полученных методом термически индуцированного фазового разделения
Özgün Can Önder, Emel Yılgör, İskender Yılgör
2018-11-20

PLA crystallinitypoly(lactic acid) foamspore size and porositysupercritical CO2 dryingthermally induced phase separation
ABSTRACT Monolithic poly(lactic acid) (PLA) foams were produced by thermally induced phase separation. PLA solutions with concentrations 8–22 wt % were prepared in tetrahydrofuran/methanol (THF/MeOH) solvent/nonsolvent mixtures at 55 °C. Homogenous solutions were quenched at −20 °C to induce phase separation and gelation. Resulting gels were mechanically stabilized by solvent exchange. Subsequent supercritical CO2 drying yielded monolithic PLA foams. Crystal structure and degree of crystallinity of the foams were obtained by x‐ray diffractometry and differential scanning calorimetry. Morphologies were determined by scanning electron microscopy. Tuning the PLA concentration and THF/MeOH ratio enabled preparation of monolithic PLA foams. Depending on the experimental conditions various morphologies, such as: interconnected networks, thin platelets, lamellar stacks, axialites, and spherulites were formed. Monoliths obtained were highly crystalline. By changing the PLA concentration monoliths with controlled average pore sizes (170–1440 nm) and porosities (80–90%) were produced. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019, 57, 98–108
1
Monolithic poly(lactic acid) foams were successfully fabricated using thermally induced phase separation followed by solvent exchange and supercritical CO2 drying.
2
PLA concentration and the THF/methanol solvent-to-nonsolvent ratio controlled foam morphology, producing interconnected networks, platelets, lamellar stacks, axialites, and spherulites.
3
The resulting PLA monoliths exhibited high crystallinity, characterized by X-ray diffraction and differential scanning calorimetry.
4
Varying PLA concentration enabled control of average pore sizes from 170 to 1440 nm while maintaining porosities of 80–90%.

Monolithic poly(lactic acid) (PLA) foams prepared by thermally induced phase separation

The effects of PLA concentration and THF/MeOH solvent–nonsolvent ratio on foam crystal structure, crystallinity, morphology, pore size, and porosity

Publication Details
Publication Date
2018-11-20
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Özgün Can Önder
Emel Yılgör
İskender Yılgör
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%