Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strength

Влияние технологических параметров на качество изделий из PLA, изготовленных методом послойного наплавления (FDM): шероховатость поверхности и прочность при растяжении
Yusuf Sezai Kahraman, Meltem Eryıldız, Mirigül Altan, Beril Eker Gümüş
2018-04-25

Taguchi L16 orthogonal arrayfused deposition modelingpolylactic acidsurface roughnesstensile strength
Abstract This study investigates the effects of process parameters on the quality of products fabricated by fused deposition modeling (FDM), such as surface roughness and tensile strength. Polylactic acid (PLA) samples were built on a FDM machine at various layer thicknesses, nozzle temperature and deposition head velocity. The effect of cooling the samples during the process was also considered. The experimental study was performed according to a mixed type Taguchi L16 orthogonal array. The effectiveness of each parameter was also discussed by an analysis of variance (ANOVA). The tensile strength results were compatible with the optical images of the fracture surfaces while the surface roughness results were compatible with the surface topography of the parts along the thickness. The two dominant quality characteristics were found to be layer thickness and deposition head velocity. Lower layer thickness values yielded higher tensile strength and lower surface roughness. Use of a cooling fan and nozzle temperature were found to be the least effective parameters. Finally, the results indicated that tensile strength and surface quality of the FDM samples improved about 25 %, and 12 %, respectively at optimal process conditions.
1
A Taguchi L16 experimental design and ANOVA quantified how layer thickness, nozzle temperature, deposition velocity, and cooling affect PLA FDM quality.
2
Cooling-fan use and nozzle temperature were the least effective parameters among those investigated.
3
Layer thickness and deposition head velocity were the two dominant parameters influencing tensile strength and surface roughness.
4
Lower layer thickness produced higher tensile strength and lower surface roughness in the fabricated PLA samples.
5
Optimized process conditions improved tensile strength by about 25% and surface quality by about 12%.

PLA products fabricated by fused deposition modeling (FDM)

The effects of layer thickness, nozzle temperature, deposition head velocity, and cooling on surface roughness and tensile strength

Publication Details
Publication Date
2018-04-25
Journal
Publisher
ISSN
Cited by
115
Access Type
Author Information
Authors
Yusuf Sezai Kahraman
Meltem Eryıldız
Mirigül Altan
Beril Eker Gümüş
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%