Ultra-low-power nonvolatile integrated photonic switches and modulators based on nanogap-enhanced phase-change waveguides
Сверхмалопотребляющие энергонезависимые интегрированные фотонные переключатели и модуляторы на основе волноводов с фазовым переходом, усиленных нанозазором
2020-11-17
SCID: 54.1/9tkfmnt4
Discuss with AI
GST phase transitionsdirectional-coupler optical switchelectro-absorption modulatornanogap-enhanced phase-change waveguidessilicon PIN heaters
Figures from the paper
Abstract (AI)
We propose a nanogap-enhanced phase-change waveguide with silicon PIN heaters. Thanks to the enhanced light-matter interaction in the nanogap, the proposed structure exhibits strong attenuation (Δα = ∼35 dB/µm) and optical phase (Δneff = ∼1.2) modulation at λ = 1550 nm when achieving complete phase transitions. We further investigate two active optical devices based on the proposed waveguide, including an electro-absorption modulator and a 1 × 2 directional-coupler optical switch. Finite-difference time-domain simulation of the proposed modulator shows a high extinction ratio of ∼17 dB at 1550 nm with an active segment of volume only ∼0.004λ3. By exploiting a directional coupler design, we present a 1 × 2 optical switch with an insertion loss of < 4 dB and a compact coupling length of ∼ 15 µm while maintaining small crosstalk less than −7.2 dB over an optical bandwidth of 50 nm. Thermal analysis shows that a 10 V pulse of 30 ns (1×1 modulator) and 55 ns (1×2 switch) in duration is required to raise the GST temperature of the phase-change waveguide above the melting temperature to induce the amorphization; however, the complete crystallization occurs by applying a 5 V pulse of 180 ns (1×1 modulator) and a 6 V pulse of 200 ns (1×2 switch), respectively.
Key Findings
1
A nanogap-enhanced phase-change waveguide with silicon PIN heaters enables strong modulation at 1550 nm, reaching approximately 35 dB/µm attenuation and Δn_eff ≈ 1.2 after complete phase transitions.
2
The devices provide compact, nonvolatile photonic switching and modulation through enhanced light–matter interaction in a nanogap phase-change waveguide.
3
The proposed 1×2 directional-coupler switch combines insertion loss below 4 dB, approximately 15 µm coupling length, and crosstalk below −7.2 dB across a 50 nm optical bandwidth.
4
The simulated electro-absorption modulator achieves an extinction ratio of approximately 17 dB using an active segment with volume only about 0.004λ³.
5
Thermal simulations indicate amorphization requires 10 V, 30 ns and 55 ns pulses for the modulator and switch, respectively; crystallization requires 5 V, 180 ns and 6 V, 200 ns pulses.
Research Object
nanogap-enhanced phase-change waveguides with silicon PIN heaters, including integrated electro-absorption modulators and 1 × 2 directional-coupler optical switches
Research Subject
ultra-low-power nonvolatile optical attenuation, phase modulation, switching performance, and thermally induced amorphization/crystallization
Publication Details
Publication Date
2020-11-17
Journal
Publisher
ISSN
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai7
Multipurpose silicon photonics signal processor core2017
Tunable nanophotonics enabled by chalcogenide phase‐change materials2020
Low-Loss and Broadband Nonvolatile Phase-Change Directional Coupler Switches2019
GST-on-silicon hybrid nanophotonic integrated circuits: a non-volatile quasi-continuously reprogrammable platform2018
Nonvolatile All‐Optical 1 × 2 Switch for Chipscale Photonic Networks2016
Miniature Multilevel Optical Memristive Switch Using Phase Change Material2019
Low-Loss Integrated Photonic Switch Using Subwavelength Patterned Phase Change Material2018