Influence of Infill Patterns Generated by CAD and FDM 3D Printer on Surface Roughness and Tensile Strength Properties
Влияние рисунков заполнения, создаваемых средствами САПР и 3D-принтером с технологией FDM, на шероховатость поверхности и прочностные характеристики при растяжении
2021-08-07
SCID: 54.1/acxgum74
Discuss with AI
Finite element analysisFused deposition modelingInfill patternsSurface roughnessTensile strength
Figures from the paper
Abstract (AI)
Fused deposition modeling (FDM) is a capable technology based on a wide range of parameters. The goal of this study is to make a comparison between infill pattern and infill density generated by computer-aided design (CAD) and FDM. Grid, triangle, zigzag, and concentric patterns with various densities following the same structure of the FDM machine were designed by CAD software (CATIA V5®). Polylactic acid (PLA) material was assigned for both procedures. Surface roughness (SR) and tensile strength analysis were conducted to examine their effects on dog-bone samples. Also, a finite element analysis (FEA) was done on CAD specimens to find out the differences between printing and simulation processes. Results illustrated that CAD specimens had a better surface texture compared to the FDM machine while tensile tests showed patterns generated by FDM were stronger in terms of strength and stiffness. In this study, samples with concentric patterns had the lowest average SR (Ra) while zigzag was the worst with the value of 6.27 µm. Also, the highest strength was obtained for concentric and grid samples in both CAD and FDM procedures. These techniques can be useful in producing highly complex sandwich structures, bone scaffolds, and various combined patterns to achieve an optimal condition.
Key Findings
1
CAD specimens exhibited better surface texture, whereas FDM-produced specimens demonstrated greater tensile strength and stiffness.
2
Concentric and grid patterns produced the highest tensile strength in both CAD and FDM specimens.
3
Concentric infill patterns achieved the lowest average surface roughness, while zigzag patterns performed worst, reaching an Ra value of 6.27 µm.
4
Finite element analysis was applied to CAD specimens to evaluate differences between simulated and experimentally printed structures, supporting applications in complex sandwich structures and bone scaffolds.
5
The study compares grid, triangle, zigzag, and concentric infill patterns and densities produced through CAD modeling and FDM printing using PLA.
Research Object
PLA dog-bone specimens with grid, triangle, zigzag, and concentric infill patterns produced by CAD and FDM 3D printing
Research Subject
The effects of infill pattern and density, and the differences between CAD and FDM fabrication, on surface roughness, tensile strength, stiffness, and simulated mechanical behavior
Publication Details
Publication Date
2021-08-07
Journal
Publisher
ISSN
Cited by
106
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai3
Optimization of FDM process parameters for tensile properties of polylactic acid specimens using Taguchi design of experiment method2020
Influence of Print Orientation on Surface Roughness in Fused Deposition Modeling (FDM) Processes2019
Topology Optimization for Multipatch Fused Deposition Modeling 3D Printing2020