Promising biodegradable composite derived from corn straw fiber and waste Polyethylene

Перспективный биоразлагаемый композит на основе волокна кукурузной соломы и отработанного полиэтилена
H. E. Nasr, Amal Hussien, Samaha Radwan, Mohamed Abdel-Aziz, Mohamed Mabrouk, Farida El-Dars
2021-03-01

biodegradable compositescellulase biodegradationchitosancorn straw fiberwaste polyethylene
Many efforts have been done to overcome of the environmental pollution problems especially waste plastic materials. So, we try to go through this point of view via studying the availability of using waste agriculture material, represented as corn straw (MS), with waste polyethylene (W-PE) as main components to represent a biodegradable compound for agriculture uses. In this study incorporation of different ratios of MS (100 micron) (10-40%) and W-PE (45-75%) with weight ratios of (5%) for malic anhydride (MA), and each of bentonite (B), diammonium phosphate (DAP), hydrolyzed starch (HSt) and polyvinyl alcohol (PVA) has been constructed. In other incorporations PVA is replaced by chitosan (Ch). Also another trail was done by replacing PVA and HSt with chitosan with weight ratio of (5%). The admixture components were formulated using Parbener mixer at temperature of 150oC, for 10 minutes, at shear rate of 30 rpm. The obtained compounds were subjected to biodegradability study using cellulase enzyme from fungal local isolate (Aspergillus oryzae) as well as commercial cellulase from Aspergillus niger (Sigma). Moreover, the compounds before and after biodegradation were characterized using FTIR, and SEM. The biodegradation studies, using cellulases from two different sources, showed that the presence of chitosan (5%) or chitosan (2.5%) with starch (2.5%) speed up the process of biodegradability with achievement of about 95% more other compounds without chitosan. This study verify two goals, firstly pollution prevention for waste plastic materials and secondly, biodegradable composites could be used in different applications.
1
Adding 5% chitosan or a combination of 2.5% chitosan and 2.5% starch accelerated biodegradation by approximately 95% compared with composites lacking chitosan.
2
Cellulases from Aspergillus oryzae and commercial Aspergillus niger were used to evaluate biodegradation, with FTIR and SEM characterizing materials before and after treatment.
3
Composites incorporated approximately 10–40% corn straw, 45–75% waste polyethylene, 5% malic anhydride, and various additives including bentonite, diammonium phosphate, starch, PVA, or chitosan.
4
Corn straw fiber and waste polyethylene were combined to develop biodegradable composites intended for agricultural applications and waste-plastic pollution reduction.
5
The results support using chitosan-containing corn-straw/waste-polyethylene composites as more biodegradable materials for potential agricultural applications.

Biodegradable composites made from corn straw fiber, waste polyethylene, and bio-additives

The effects of composite formulation, particularly chitosan and starch incorporation, on cellulase-mediated biodegradation and structural changes

Publication Details
Publication Date
2021-03-01
Journal
Publisher
ISSN
Cited by
2
Access Type
Author Information
Authors
H. E. Nasr
Amal Hussien
Samaha Radwan
Mohamed Abdel-Aziz
Mohamed Mabrouk
Farida El-Dars
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%