Surface optimization of superconducting aluminum resonators for robust quantum device fabrication

Оптимизация поверхности сверхпроводящих алюминиевых резонаторов для надежного изготовления квантовых устройств
I. Eisele, Alwin Maiwald, Emir Music, L. Schwarzenbach, Carla Morán Guizán, J. Weber, T. Mayer, R. N. Pereira, Christoph Kutter, Simon Lang, Daniela Zahn
2026-06-10

dielectric lossquantum device fabricationselective oxide removalsuperconducting aluminum resonatorstwo-level-system loss
Aluminum (Al) remains the central material for superconducting qubits, and considerable effort has been devoted to optimizing its deposition and patterning for quantum devices. However, post-processing strategies focused on oxide removal of niobium (Nb) and tantalum (Ta) -based resonators using buffered oxide etch (BOE), which can not be used for Al. This challenge becomes particularly relevant for industry-scale fabrication with multi-chip bonding, where delays between sample preparation and cooldown require surface treatments that preserve low dielectric loss during extended exposure to ambient conditions. In this work, we investigate surface modification approaches for Al resonators subjected to a 24-hour delay prior to cryogenic measurement. Passivation using self-limiting oxygen and fluorine chemistries was evaluated utilizing different plasma processes. Remote oxygen plasma treatment reduced dielectric losses, in contrast to direct oxygen plasma. A fluorine-based plasma process was developed that passivated the Al surface for subsequent BOE treatment. However, the fluorine content in the surface resulted in higher loss, identifying fluorine as an unsuitable passivation material for Al resonators. Above all, selective oxide removal using HF (hydrogen fluoride) vapor and phosphoric acid yielded median dielectric losses as low as $\tildeδ_\mathrm{LP} = 5.7 \times 10^{-7}$ ($Q_\mathrm{LP} \approx 1.7\,\mathrm{M}$) with $\tildeδ_\mathrm{TLS} = 3.6 \times 10^{-7}$ ($Q_\mathrm{TLS} \approx 2.8\,\mathrm{M}$) in the single photon regime. Selective oxide removal provides a promising pathway for robust Al-based qubit fabrication, as it preserves low dielectric losses for a 24-hour delay before cooldown.
1
A fluorine-based plasma process enabled aluminum-surface passivation before BOE treatment, but residual fluorine increased loss and made fluorine unsuitable.
2
Remote oxygen plasma treatment reduced dielectric losses in aluminum resonators, unlike direct oxygen plasma exposure.
3
Selective oxide removal preserved low dielectric losses after a 24-hour ambient delay before cooldown, supporting robust aluminum-based qubit fabrication.
4
Selective oxide removal using HF vapor and phosphoric acid achieved median losses of δ̃LP = 5.7 × 10⁻⁷ (QLP ≈ 1.7 million) and δ̃TLS = 3.6 × 10⁻⁷ (QTLS ≈ 2.8 million) in the single-photon regime.

aluminum superconducting resonators subjected to a 24-hour delay before cryogenic measurement

surface modification and selective oxide-removal effects on dielectric loss and preservation of low-loss performance

Publication Details
Publication Date
2026-06-10
Journal
Publisher
ISSN
Cited by
1
Access Type
Author Information
Authors
I. Eisele
Alwin Maiwald
Emir Music
L. Schwarzenbach
Carla Morán Guizán
J. Weber
T. Mayer
R. N. Pereira
Christoph Kutter
Simon Lang
Daniela Zahn
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%