Binder jetting printing of zirconia structures via grading powder and epoxy binder
Биндер-джет печать циркониевых конструкций с использованием градуированного порошка и эпоксидного связующего
2022-11-17
SCID: 54.1/fb4ek36r
Discuss with AI
binder jettingepoxy bindergrading powder M0green part propertieszirconia
Figures from the paper
Abstract (AI)
The binder jetting (BJ) process shows significant superiority in manufacturing ceramic parts with a complex structure. The performance of the green part is highly reliant on the features of raw materials. A kind of grading zirconia powder M0 was designed, its intrinsic characteristics including microstructure, size and size distribution, bulk density, porosity, hall velocity and spread performance were systematically evaluated. The design principles of M0 were illustrated in detail. Meanwhile, a kind of organic epoxy binder was prepared and its properties including density, viscosity and surface tension were estimated. The jet ability of binder was evaluated quantitatively. The compatibility and bonding strength between binder and powder were assessed through contact angle, infiltration time and microstructure of M0. As a result, M0 and epoxy binder can be successfully applied in the printer, the zirconia structure with good dimensional accuracy (shrinkage rate ≤ ±2%) and flexible strength (1.74 ± 0.28 MPa) were achieved.
Key Findings
1
A graded zirconia powder formulation (M0) was designed and its intrinsic properties (microstructure, size distribution, bulk density, porosity, Hall flow velocity, spread performance) were systematically evaluated.
2
An organic epoxy binder was prepared and characterized (density, viscosity, surface tension) and its jetting ability was quantitatively evaluated.
3
Compatibility and bonding strength between the epoxy binder and M0 powder were assessed via contact angle, infiltration time, and microstructural analysis.
4
Design principles for the M0 graded zirconia powder were illustrated in detail, enabling targeted raw-material features for binder jetting.
5
Printed green parts achieved a measured flexural (flexible) strength of 1.74 ± 0.28 MPa.
6
Using M0 powder and the epoxy binder in binder jetting produced zirconia structures with good dimensional accuracy (shrinkage rate ≤ ±2%).
Research Object
Grading zirconia powder M0 and organic epoxy binder used in binder jetting to produce zirconia structures
Research Subject
Compatibility, bonding and processing performance of the M0 powder and epoxy binder in binder jetting, including powder characteristics (microstructure, particle size/distribution, bulk density, porosity, Hall flow, spreadability), binder properties (density, viscosity, surface tension, jetability), their interfacial behavior (contact angle, infiltration time, bonding strength), and resulting part dimensional accuracy and green strength
Publication Details
Publication Date
2022-11-17
Journal
Publisher
ISSN
Cited by
2
Access Type
Author Information
Download PDF
Subscribe to digest