Binder jetting yttria stabilised zirconia ceramic with inorganic colloid as a binder
Биндер-джет печать оксида циркония, стабилизованного иттрием, с использованием неорганического коллоида в качестве связующего
2019-09-13
SCID: 54.1/hzqjzswp
Discuss with AI
ZrO2 ceramic particlesbinder-jettinginorganic colloidal binderyttria stabilised zirconiazirconium basic carbonate
Figures from the paper
Abstract (AI)
The new inorganic colloid is a particle-free decomposable binder that can solve the nozzle clogging problem and precipitate zirconia particle upon heating. The inorganic colloidal binder can be used as a binder precursor to replace commonly used PVP binder in printing ZrO2 ceramics parts using binder-jet technology. Green bodies were printed using inorganic colloid binders with different saturation level and PVP binder separately, then cured and sintered. The effects of binder saturation level and sintered temperature on the properties of the green and sintered bodies were investigated. After being deposited into the powder bed interstices and cured, the inorganic colloidal binder containing zirconium basic carbonate decomposes and forms ZrO2 ceramic particles that are filled the interstices and sintered to provide bonding strength to the printed parts. Samples with inorganic colloidal binder eventually perform better surface quality and denser sintered body than polymer binder when using same saturation ratio.
Key Findings
1
A particle-free inorganic colloidal binder that decomposes and precipitates zirconia particles can be used in binder-jet printing of ZrO2 ceramics to avoid nozzle clogging.
2
Green bodies were successfully printed using the inorganic colloid at different saturation levels and compared to prints using conventional PVP binder.
3
Printed samples made with the inorganic colloidal binder achieved better surface quality and denser sintered bodies than those made with polymer (PVP) binder at the same saturation ratio.
4
Saturation level of the inorganic colloidal binder and sintering temperature significantly affect properties of green and sintered bodies.
5
The inorganic colloidal binder contains zirconium basic carbonate which decomposes after curing to form ZrO2 particles that fill powder-bed interstices and provide bonding upon sintering.
Research Object
Binder-jet printed yttria-stabilised zirconia (ZrO2) ceramic parts produced using an inorganic colloidal (particle-free decomposable) binder
Research Subject
Effect of using an inorganic colloidal binder (vs PVP) and binder saturation level and sintering temperature on green-body and sintered-body properties: binder decomposition/precipitation into ZrO2, interstice filling, bonding strength, surface quality and sintered density
Publication Details
Publication Date
2019-09-13
Journal
Publisher
ISSN
Cited by
48
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai1
Cited by3
Additive manufacturing of ceramics: Advances, challenges, and outlook2023
Binder jetting printing of zirconia structures via grading powder and epoxy binder2022
Vat Photopolymerization of Additively Manufactured Zirconia Ceramic Structures from Slurries of Surface Functionalized Particles: A Critical Review2025