Effect of Infill Pattern on Impact Toughness, Microstructure, and Surface Roughness of Inconel 625 Built via Filament-Based Material Extrusion Additive Manufacturing

Влияние схемы заполнения на ударную вязкость, микроструктуру и шероховатость поверхности изделий из Inconel 625, изготовленных методом аддитивного производства с экструзией материала на основе филамента
Gandjar Kiswanto, Jos Istiyanto, Ahmad Yusuf Kholil
2023-06-11

Charpy impact toughnessInconel 625filament-based material extrusioninfill patternsurface roughness
Filament-based material extrusion additive manufacturing (FMEAM) is an additive manufacturing technique that uses 3D printing. Additive manufacturing could build parts with infill variations. Solid or triangular infill pattern could be selected as needed. The solid pattern will have the maximum material volume, while the triangular pattern will contain a triangular lattice structure that fills the voids in the volume so the material requirement is reduced. This is valuable in optimizing the requirements of metallic materials for mechanical properties without changing the surface shape. The alloy Inconel 625, which is very popular in the aerospace industry have been developed as a feed material of FMEAM. However, for developing rotating parts, such as turbine blades, impact toughness, surface roughness and microstructure need to be investigated. This research was conducted to determine the effect of the infill pattern on the impact toughness, morphology of surface fracture, microstructure of side surface and surface roughness with Inconel 625 material built using FMEAM. The Charpy impact test, s ASTM 23, with v-notch testing method and SEM with EDS were performed. The results showed that the impact toughness for solids was higher than the value for the triangular infill pattern. It was discovered that the cavities in the triangular lattice structure within the specimen reduced the impact toughness to 57.6%. Micropores and residual polymer trapped on the surface reduce impact toughness. However, the same surface shape on solid and triangular infill patterns with surface roughness of 2.44 and 10.03 µm is still feasible for manufacture.
1
Cavities in the triangular lattice structure reduced impact toughness to 57.6% of the solid-infill value.
2
Micropores and residual polymer trapped on the surface contributed to reduced impact toughness.
3
Solid and triangular infill specimens retained the same external surface shape, while surface roughness differed at 2.44 and 10.03 µm, respectively.
4
Solid infill produced higher Charpy impact toughness than triangular infill in FMEAM-built Inconel 625 specimens.
5
The study evaluated fracture morphology and side-surface microstructure using SEM with EDS alongside ASTM 23 V-notch Charpy testing.

Inconel 625 parts built via filament-based material extrusion additive manufacturing with solid or triangular infill patterns

The effects of solid versus triangular infill patterns on impact toughness, fracture-surface morphology, side-surface microstructure, and surface roughness

Publication Details
Publication Date
2023-06-11
Journal
Publisher
ISSN
Cited by
15
Access Type
Author Information
Authors
Gandjar Kiswanto
Jos Istiyanto
Ahmad Yusuf Kholil
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%