Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Аддитивное производство металлических и керамических компонентов методом экструзии материалов с использованием высоконаполненных полимеров: обзор и перспективы развития
2018-05-18
SCID: 54.1/wqc62kgs
Discuss with AI
debinding and sinteringhighly-filled polymersmaterial extrusion additive manufacturingmetallic and ceramic componentssacrificial polymeric binders
Figures from the paper
Abstract (AI)
Additive manufacturing (AM) is the fabrication of real three-dimensional objects from metals, ceramics, or plastics by adding material, usually as layers. There are several variants of AM; among them material extrusion (ME) is one of the most versatile and widely used. In MEAM, molten or viscous materials are pushed through an orifice and are selectively deposited as strands to form stacked layers and subsequently a three-dimensional object. The commonly used materials for MEAM are thermoplastic polymers and particulate composites; however, recently innovative formulations of highly-filled polymers (HP) with metals or ceramics have also been made available. MEAM with HP is an indirect process, which uses sacrificial polymeric binders to shape metallic and ceramic components. After removing the binder, the powder particles are fused together in a conventional sintering step. In this review the different types of MEAM techniques and relevant industrial approaches for the fabrication of metallic and ceramic components are described. The composition of certain HP binder systems and powders are presented; the methods of compounding and filament making HP are explained; the stages of shaping, debinding, and sintering are discussed; and finally a comparison of the parts produced via MEAM-HP with those produced via other manufacturing techniques is presented.
Key Findings
1
Highly-filled polymers use sacrificial polymer binders to shape metal or ceramic powders, followed by binder removal and conventional sintering to consolidate particles.
2
Material extrusion additive manufacturing can fabricate three-dimensional metallic and ceramic components by depositing highly particle-filled polymer feedstocks layer by layer.
3
Material extrusion with highly-filled polymers is presented as an indirect manufacturing route whose final parts are compared with components made using other manufacturing techniques.
4
The approach expands material extrusion beyond conventional thermoplastics and particulate composites to enable metallic and ceramic component production.
5
The review covers material extrusion techniques, industrial implementations, powder and binder compositions, compounding and filament production, shaping, debinding, and sintering.
Research Object
Metallic and ceramic components fabricated by material extrusion additive manufacturing using highly-filled polymer feedstocks
Research Subject
the material compositions, processing stages, and resulting part characteristics of indirect material-extrusion additive manufacturing, including shaping, debinding, sintering, and comparison with other manufacturing techniques
Publication Details
Publication Date
2018-05-18
Journal
Publisher
ISSN
Cited by
730
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai1
Cited by5
Laminated Object Manufacturing of Ceramic‐Based Materials2020
Process monitoring for material extrusion additive manufacturing: a state-of-the-art review2021
Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling2023
Colloidal Processing of Complex-Shaped ZrB2-Based Ultra-High-Temperature Ceramics: Progress and Prospects2022
Effect of Infill Pattern on Impact Toughness, Microstructure, and Surface Roughness of Inconel 625 Built via Filament-Based Material Extrusion Additive Manufacturing2023