CdTe-based thin film photovoltaics: Recent advances, current challenges and future prospects
Тонкоплёночная фотовольтаика на основе CdTe: последние достижения, текущие проблемы и перспективы развития
2023-03-28
SCID: 54.1/hhwyq2ne
Discuss with AI
CdSexTe1-x absorbersCdTe thin-film photovoltaicschlorine passivationminority carrier lifetimeopen-circuit voltage
Figures from the paper
Abstract (AI)
Cadmium telluride (CdTe)-based cells have emerged as the leading commercialized thin film photovoltaic technology and has intrinsically better temperature coefficients, energy yield, and degradation rates than Si technologies. More than 30 GW peak (GWp) of CdTe-based modules are installed worldwide, multiple companies are in production, modules are shipping at up to 18.6% efficiency, and lab cell efficiency is above 22%. We review developments in the science and technology that have occurred over approximately the past decade. These achievements were enabled by manufacturing innovations and scaling module production, as well as maximizing photocurrent through window layer optimization and alloyed CdSexTe1-x (CST) absorbers. Improved chlorine passivation processes, film microstructure, and serendipitous Se defect passivation significantly increased minority carrier lifetime. Efficiencies >22% have been realized for both Cu and As doped CST-based cells. The path to further efficiency gains hinges primarily on increasing open circuit voltage (Voc) and fill factor (FF) through innovations in materials, fabrication methods, and device stacks. Replacing the longstanding Cu doping with As doping is resulting in better module stability and is being translated to large-scale production. To realize 25% efficiency and >1 V Voc, research and development is needed to increase the minority carrier lifetime beyond 100 ns, reduce grain boundary and interface recombination, and tailor band diagrams at the front and back interfaces. Many of these goals have been realized separately however combining them together using scalable manufacturing approaches has been elusive to date. We review these achievements and outstanding opportunities for this remarkable photovoltaic technology.
Key Findings
1
Both Cu- and As-doped CdSexTe1−x cells have achieved efficiencies above 22%, while replacing Cu with As improves module stability and is entering large-scale production.
2
CdTe has become the leading commercialized thin-film photovoltaic technology, with over 30 GWp installed worldwide and modules shipping at up to 18.6% efficiency.
3
Further efficiency gains primarily require higher open-circuit voltage and fill factor through improved materials, fabrication processes, device stacks, and interface band alignment.
4
Manufacturing scale-up, window-layer optimization, and CdSexTe1−x absorbers increased photocurrent, while chlorine passivation, microstructure control, and selenium defect passivation improved minority-carrier lifetime.
5
Reaching 25% efficiency and open-circuit voltage above 1 V requires minority-carrier lifetimes beyond 100 ns and reduced grain-boundary and interface recombination; integrating these advances with scalable manufacturing remains challenging.
Research Object
CdTe-based thin-film photovoltaic cells and modules, including alloyed CdSexTe1−x absorbers
Research Subject
Recent scientific and technological advances, performance limitations, and routes to improved efficiency, voltage, fill factor, lifetime, stability, and scalable manufacturing
Publication Details
Publication Date
2023-03-28
Journal
Publisher
ISSN
Cited by
495
Open access PDF
Access Type
Author Information
Download PDF
Subscribe to digest