Synergistic Toughening and Strain Releasing Strategy in Metal Halide Perovskite Photovoltaics
Стратегия синергетического упрочнения и релаксации деформаций в фотоэлектрических устройствах на основе металлогалогенидных перовскитов
2024-08-24
SCID: 54.1/hkyg9gwu
Discuss with AI
Metal halide perovskitesNanomechanical atomic force microscopyNon-radiative recombinationPerovskite solar cellsPoly(lipoic acid-co-styrene) elastomer
Figures from the paper
Abstract (AI)
Abstract Metal halide perovskite with high Young's modulus is prone to form cracks when subjected to mechanical stresses such as bending, twisting, or impacting, ultimately leading to a permanent decline in the performance of their photovoltaic devices. These mechanical properties pose challenges to the durability of long‐term service of photovoltaic devices and the production of flexible devices. To address this issue, the poly (lipoic acid‐co‐Styrene) elastomer is employed to modulate the modulus of perovskite films. The peak force quantitative nanomechanical atomic force microscopy measurements and nanoindentation tests demonstrated a reduction in modulus, with the lower modulus preventing the formation of cracks and defects during deformation. Moreover, this approach also suppressed the non‐radiative recombination of perovskite solar cells by leveraging the interaction between functional groups and defects. Through this method, the rigid inverted devices attained a power conversion efficiency of 24.42% alongside remarkable stability. Concurrently, flexible inverted devices achieved a power conversion efficiency of 22.21%. This strategy offers a promising avenue for fabricating flexible perovskite solar cells and enhancing their mechanical durability.
Key Findings
1
Flexible inverted devices achieved a power conversion efficiency of 22.21%, demonstrating improved prospects for mechanically durable flexible photovoltaics.
2
Functional-group interactions with defects suppress non-radiative recombination in perovskite solar cells.
3
Peak-force quantitative nanomechanical AFM and nanoindentation measurements confirmed that elastomer incorporation lowers the perovskite film modulus.
4
Poly(lipoic acid-co-styrene) elastomer modulates the Young’s modulus of metal halide perovskite films, reducing their susceptibility to deformation-induced cracks and defects.
5
Rigid inverted perovskite devices achieved a power conversion efficiency of 24.42% with remarkable stability.
Research Object
metal halide perovskite photovoltaic devices, including rigid and flexible inverted perovskite solar cells
Research Subject
the synergistic mechanical toughening and strain-release mechanisms that reduce modulus, prevent deformation-induced cracking and defects, and suppress non-radiative recombination to improve photovoltaic efficiency and stability
Publication Details
Publication Date
2024-08-24
Journal
Publisher
ISSN
Cited by
40
Access Type
Author Information
Download PDF
Subscribe to digest
References available in scid.ai4
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells2009
The Main Progress of Perovskite Solar Cells in 2020–20212021
Strain effects on halide perovskite solar cells2022
Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness2021