Recycling of LDPE-PVC blends from cable waste: Mechanical characterization and performance optimization

Переработка смесей ПЭНП–ПВХ из кабельных отходов: механическая характеристика и оптимизация эксплуатационных свойств
Alessandro Pegoretti, Daniele Rigotti
2024-08-03

Cable waste recyclingCompatibilizerGenetic algorithm optimizationLDPE-PVC blendsThermomechanical properties
The recycling of polyvinylchloride (PVC) from waste electrical cables in blends with low-density polyethylene (LDPE) is here explored, focusing on the material's mechanical and physical responses. Factors influencing these responses were identified, and reasonable ranges of variability were estimated for each factor. A comprehensive test plan was subsequently devised to develop optimal PVC/LDPE blends. The samples were produced by melt-blending the polymers in a counter-rotating internal mixer followed by compression molding. The effects of suitable coupling additives were also evaluated to enhance phases adhesion. The study investigated the impact of various processing parameters on thermomechanical properties using ANOVA, while a specific focus on optimizing material toughness was pursued. This optimization aimed to maximize both elastic modulus and elongation at break, through the application of genetic algorithms. Introducing a 5 % compatibilizer significantly enhances the interface, resulting in a complex fracture surface facilitated by its presence. Higher mixing temperatures promote better dispersion and distribution of PVC and the compatibilizer within the LDPE matrix, yielding a more uniform and interconnected structure. Increased PVC content correlates with reduced elastic modulus in the blend. The inclusion of a compatibilizer plays a vital role in counteracting the negative effects of PVC particles on stiffness, acting as a bridge to enhance interactions with the matrix and thereby improving interfacial adhesion and overall structure. The study offers insights into enhancing the recyclability of PVC from waste cables and optimizing the mechanical performance of the resultant materials.
1
A 5% compatibilizer significantly improves PVC–LDPE interfacial adhesion, producing a more complex fracture surface and better phase integration.
2
ANOVA and genetic-algorithm optimization were applied to maximize elastic modulus and elongation at break, targeting improved blend toughness and mechanical performance.
3
Higher mixing temperatures enhance PVC and compatibilizer dispersion within the LDPE matrix, creating a more uniform and interconnected morphology.
4
Increasing PVC content reduces the blend’s elastic modulus, while compatibilizer addition counteracts this stiffness loss by bridging PVC particles and the LDPE matrix.
5
The study establishes processing-factor ranges and a comprehensive experimental plan for optimizing recycled PVC/LDPE blends from cable waste.

Recycled PVC/LDPE blends derived from waste electrical cables

Mechanical and physical responses of the blends, including thermomechanical properties, interfacial adhesion, fracture behavior, and toughness optimization as functions of composition, compatibilizer content, and processing conditions

Publication Details
Publication Date
2024-08-03
Journal
Publisher
ISSN
Cited by
7
Access Type
Author Information
Authors
Alessandro Pegoretti
Daniele Rigotti
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%