Recycling of Plastics from Cable Waste from Automotive Industry in Poland as an Approach to the Circular Economy

Переработка пластмасс из кабельных отходов автомобильной промышленности в Польше как подход к циркулярной экономике
Mateusz Barczewski, Dorota Czarnecka‐Komorowska, Wiktoria Kanciak, Roman Barczewski, Roman Regulski, Dariusz Sędziak, Cezary Jędryczka
2021-11-07

automotive cable wasteautomotive shredder residue (ASR)circular economypolyethylene-grafted maleic anhydride (PE-g-MAH)recycled low-density polyethylene (rLDPE)
This paper presents the contemporary problems of polymer waste recycling, mainly recycling cables from end-of-life vehicles. The authors developed a new material based on mixed polymer waste (ASR) modified with a ductile polymer, mainly recycled low-density polyethylene (rLDPE), to produce moisture-resistant boards with beneficial mechanical properties. The ASR-based compositions without and with homogenization process-including physical, chemical, and shear-assisted compatibilization-were successfully applied and verified by evaluating final recycled product properties. The results showed that recycled polyethylene (rLDPE) was effective as a modifier increasing tensile modulus and flexural strength compare to an ASR mixture. It was found that the adding 5 wt % of polyethylene-grafted maleic anhydride (PE-g-MAH) as a compatibilizer to the ASR mixture significantly increases the homogenization of the components in the ASR matrix. The optimal solution for management cable waste is the manufacture of ASR composites with homogenization using an internal mixer the adding 20 wt % of rLDPE and 5 wt % of PE-g-MAH to the mixed plastics cable waste. The results obtained demonstrate that the hot-pressing with the pre-blending with rLDPE and compatibilizer of the ASR based waste provides a high gain in mechanical and usage properties, enabling the circular economy of plastics from automotive cables.
1
A new ASR-based material modified with recycled low-density polyethylene (rLDPE) produces moisture-resistant boards with beneficial mechanical properties.
2
Adding rLDPE increases the tensile modulus and flexural strength of mixed automotive cable plastics compared with unmodified ASR mixtures.
3
Including 5 wt% polyethylene-grafted maleic anhydride (PE-g-MAH) significantly improves homogenization of components within the ASR matrix.
4
Pre-blending ASR waste with rLDPE and compatibilizer before hot pressing improves mechanical and usage properties, supporting circular plastics management.
5
The optimal formulation uses internal-mixer homogenization with 20 wt% rLDPE and 5 wt% PE-g-MAH in mixed cable waste.

ASR-based composites produced from mixed polymer cable waste from end-of-life vehicles, modified with recycled low-density polyethylene (rLDPE) and polyethylene-grafted maleic anhydride (PE-g-MAH)

The effects of rLDPE modification, PE-g-MAH compatibilization, homogenization, and hot pressing on the composites’ morphology, moisture resistance, mechanical properties, and suitability for circular-economy recycling

Publication Details
Publication Date
2021-11-07
Journal
Publisher
ISSN
Cited by
56
Access Type
Author Information
Authors
Mateusz Barczewski
Dorota Czarnecka‐Komorowska
Wiktoria Kanciak
Roman Barczewski
Roman Regulski
Dariusz Sędziak
Cezary Jędryczka
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%