Preparation and characterization of wood‐fiber‐reinforced polyamide 6–polypropylene blend composites
Получение и характеристика композиционных материалов на основе смеси полиамида 6 и полипропилена, армированных древесным волокном
2019-01-08
SCID: 54.1/t8uc7zpr
Discuss with AI
hot pressinginterfacial compatibilitylithium chloride modificationpolyamide 6–polypropylene blendswood-fiber-reinforced composites
Figures from the paper
Abstract (AI)
ABSTRACT In this study, we used lithium chloride (LiCl) as a modifier to decrease the melting temperature (T m) of polyamide 6 (PA6), and then, we fabricated wood‐fiber‐reinforced PA6–polypropylene (PP) blend composites via hot pressing. From crystallization analysis, the composites exhibited a lower T m and a lower processing temperature compared to PA6. Color and Fourier transform infrared analyses showed that severe thermal degradation and discoloration of the composites could be prevented by the incorporation of LiCl. LiCl had positive effects on the mechanical properties of the final product and the interfacial compatibility among PA6, PP, and wood fiber. The flexural strength increased by 8.5%. In addition, both maleic anhydride grafted PP and wood fiber improved the mechanical properties. The flexural strengths increased by 7.9 and 40%, respectively. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47413.
Key Findings
1
LiCl improved mechanical properties and interfacial compatibility among PA6, PP, and wood fiber.
2
LiCl incorporation prevented severe thermal degradation and discoloration during composite processing, as indicated by color and FTIR analyses.
3
LiCl increased composite flexural strength by 8.5%, while maleic-anhydride-grafted PP and wood fiber increased it by 7.9% and 40%, respectively.
4
Lithium chloride modified PA6, lowering its melting temperature and enabling lower-temperature processing of wood-fiber-reinforced PA6–PP composites.
Research Object
wood-fiber-reinforced polyamide 6–polypropylene blend composites
Research Subject
the effects of LiCl modification, maleic anhydride grafted PP, and wood fiber on melting/processing behavior, thermal stability, interfacial compatibility, and mechanical properties
Publication Details
Publication Date
2019-01-08
Journal
Publisher
ISSN
Access Type
Author Information
Download PDF
Subscribe to digest