Natural fiber blend—nylon 6 composites

Композиты на основе смеси натуральных волокон и нейлона 6
Douglas J. Gardner, Alper Kızıltaş, Ertan Özen, Esra Erbas Kiziltas
2013-03-13

Injection moldingMechanical propertiesMelt mixingNatural fiber blendNylon 6 composites
Abstract In this study, engineering thermoplastic composites were prepared from natural fiber blend–filled nylon 6. Natural fiber blend from a mixture of kenaf, flax, and hemp fibers were added to nylon 6 using melt mixing to produce compounded pellets. The natural fibers/ nylon6 composites with varying concentrations of natural fibers (from 5 to 20 wt%) were prepared by injection molding. The tensile and flexural properties of the nylon 6 composites were increased significantly with the addition of the natural fiber blend. The maximum strength and modulus of elasticity for the nylon 6 composites were achieved at a natural fiber blend weight fraction of 20%. The Izod impact strength of composites decreased with the incorporation of natural fibers without any surface treatments and coupling agent. The melt flow index (MFI) also decreased with increasing natural fiber blend loading. The results of tensile and flexural modulus of elasticity (FMOE) are in accordance with the rheological data from the MFI measurements. The increase in the tensile and flexural properties indicated that efficient bonding occurred between the natural fibers and nylon 6. No fiber pullout was observed during the scanning electron microscopic analysis of the fracture surfaces. The higher mechanical results with lower density demonstrate that a natural fiber blend can be used as a sufficient reinforcing material for low‐cost, eco‐friendly composites in the automotive industry and in other applications such as the building and construction industries, packaging, consumer products, etc.POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers
1
Fracture microscopy showed no fiber pullout, indicating efficient bonding between the natural fibers and nylon 6.
2
Izod impact strength decreased when untreated natural fibers were incorporated without a coupling agent or surface treatment.
3
Kenaf, flax, and hemp fiber blends were melt-mixed with nylon 6 and injection-molded into composites containing 5–20 wt% natural fibers.
4
Melt flow index decreased as natural-fiber loading increased, consistent with the observed increases in tensile and flexural modulus.
5
Tensile and flexural strength and modulus increased significantly with natural-fiber addition, reaching maximum values at 20 wt% loading.
6
The combination of improved mechanical properties and lower density supports potential use in low-cost, eco-friendly automotive, construction, packaging, and consumer-product composites.

Natural fiber blend-filled nylon 6 composites containing kenaf, flax, and hemp fibers

The effects of natural fiber blend loading (5–20 wt%) on the composites’ tensile, flexural, impact, rheological, and interfacial bonding properties

Publication Details
Publication Date
2013-03-13
Journal
Publisher
ISSN
Cited by
95
Access Type
Author Information
Authors
Douglas J. Gardner
Alper Kızıltaş
Ertan Özen
Esra Erbas Kiziltas
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%