Impact of lithium chloride on the performance of wood fiber reinforced polyamide 6/high‐density polyethylene blend composites
Влияние хлорида лития на эксплуатационные характеристики композитов на основе смесей полиамида 6 и полиэтилена высокой плотности, армированных древесным волокном
2019-06-09
SCID: 54.1/w87jeqdn
Discuss with AI
flexural strengthinterfacial compatibilitylithium chloridepolyamide 6/high-density polyethylene blendswood fiber reinforced composites
Figures from the paper
Abstract (AI)
Abstract Wood fiber reinforced polyamide 6 (PA6) and high‐density polyethylene (HDPE) blend composites were prepared via hot pressing. The PA6 was modified by lithium chloride (LiCl) for reducing the melting point. Crystallization analysis exhibited the decrease of the melting point (220°C to none) and the processing temperature (240°C to 200°C) of PA6. Thus, undesired discoloration and degradation were improved. LiCl was in favor of the interfacial compatibility among PA6, HDPE, and wood fiber. Also the LiCl could enhance the mechanical properties of the final products. The maximum flexural strength can reach up to 100.4 MPa. Besides, both maleic anhydride grafted high‐density polyethylene and wood fiber had positive effects on the mechanical performance.
Key Findings
1
Lithium chloride enhanced interfacial compatibility among PA6, HDPE, and wood fibers.
2
Lithium chloride improved composite mechanical performance, with maximum flexural strength reaching 100.4 MPa.
3
Lithium chloride modification reduced PA6’s melting point from 220°C to undetectable levels and lowered processing temperature from 240°C to 200°C.
4
Lower-temperature processing improved discoloration and degradation of wood fiber-reinforced PA6/HDPE blend composites.
5
Maleic anhydride-grafted HDPE and wood fibers also positively contributed to the composites’ mechanical properties.
Research Object
wood fiber reinforced polyamide 6/high-density polyethylene blend composites modified with lithium chloride
Research Subject
the effects of lithium chloride on melting and processing temperatures, interfacial compatibility, discoloration/degradation, and mechanical performance
Publication Details
Publication Date
2019-06-09
Journal
Publisher
ISSN
Access Type
Author Information
Download PDF
Subscribe to digest