3D printing of a continuous fiber-reinforced composite based on a coaxial Kevlar/PLA filament

3D-печать композита с непрерывным волоконным армированием на основе коаксиального филамента Kevlar/PLA
Trenton Cersoli, Bharat Yelamanchi, Eric W. MacDonald, Jose Gonzalo Carrillo, Pedro Cortes
2021-01-01

Kevlar/PLA filamentcontinuous fiber reinforcementfused filament fabricationhigh-velocity impact resistancetensile strength
Additive manufacturing has allowed for the production of complex and mass customized geometries, but often at the expense of mechanical performance, a penalty which can be in part mitigated with the fabrication of composite parts. Thermoplastic structures fabricated with material extrusion additive manufacturing stand to be improved in terms of fracture toughness with the integration of continuous fibers. The present research program has investigated the production of a continuously reinforced filament to be used in open-source fused filament fabrication systems. Three different volume fractions of Kevlar fibers were incorporated into a polylactic acid (PLA) thermoplastic filament. It was observed that a 20% fiber volume fraction resulted in a doubling of the tensile strength relative to the unreinforced PLA parts. High-velocity impact tests were also performed on the reinforced printed thermoplastic material, and it was observed that the composite with the highest fiber volume fraction provided an impact energy resistance improved by a factor of four, relative to the plain PLA. The reinforced fibers have shown to restrain the penetration of the projectile at velocities similar to those that perforated the unreinforced PLA. The present work has demonstrated the production of printed composites without the need of modifying the extruding systems of a commercial 3D printer. This approach could represent an alternate and feasible process for producing continuously reinforced 3D-printed thermoplastic parts with utility for high-velocity impact applications.
1
A 20% Kevlar fiber volume fraction doubled tensile strength relative to unreinforced PLA parts.
2
A coaxial Kevlar/PLA filament was developed for continuous-fiber reinforcement in open-source fused filament fabrication systems.
3
Kevlar fibers restrained projectile penetration at velocities that perforated unreinforced PLA, supporting applications in high-velocity impact protection.
4
The highest-fiber-volume composite increased high-velocity impact energy resistance fourfold compared with plain PLA.
5
Three Kevlar fiber volume fractions were incorporated into PLA, enabling printed composite production without modifying a commercial 3D printer’s extrusion system.

3D-printed continuous Kevlar-fiber-reinforced PLA composite parts produced from coaxial Kevlar/PLA filament

The effects of Kevlar fiber volume fraction on the tensile strength, fracture toughness, and high-velocity impact resistance of the printed composite

Publication Details
Publication Date
2021-01-01
Journal
Publisher
ISSN
Access Type
Author Information
Authors
Trenton Cersoli
Bharat Yelamanchi
Eric W. MacDonald
Jose Gonzalo Carrillo
Pedro Cortes
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%