3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

3D-печать термопластичных композитов, армированных непрерывным волокном: механизм и характеристики
Dichen Li, Xiaoyong Tian, Yi Qian Cao, Chuncheng Yang, Tengfei Liu
2017-01-16

3D printingcarbon fiber/ABS compositescomposite extrusioncontinuous fiber reinforced thermoplasticsinterlaminar shear strength
Purpose Continuous fiber reinforced thermoplastic composites (CFRTPCs) are becoming more significant in industrial applications but are limited by the high cost of molds, the manufacturing boundedness of complex constructions and the inability of special fiber alignment. The purpose of this paper is to put forward a novel three-dimensional (3D) printing process for CFRTPCs to realize the low-cost rapid fabrication of complicated composite components. Design/methodology/approach For this purpose, the mechanism of the proposed process, which consists of the thermoplastic polymer melting, the continuous fiber hot-dipping and the impregnated composites extruding, was investigated. A 3D printing equipment for CFRTPCs with a novel composite extrusion head was developed, and some composite samples have been fabricated for several mechanical tests. Moreover, the interface performance was clarified with scanning electron microscopy images. Findings The results showed that the flexural strength and the tensile strength of these 10 Wt.% continuous carbon fiber (CCF)/acrylonitrile-butadiene-styrene (ABS) specimens were improved to 127 and 147 MPa, respectively, far greater than the one of ABS parts and close to the one of CCF/ABS (injection molding) with the same fiber content. Moreover, these test results also exposed the very low interlaminar shear strength (only 2.81 MPa) and the inferior interface performance. These results were explained by the weak meso/micro/nano scale interfaces in the 3D printed composite parts. Originality/value The 3D printing process for CFRTPCs with its controlled capabilities for the orientation and distribution of fiber has great potential for manufacturing of load-bearing composite parts in the industrial circle.
1
A dedicated CFRTPC printer with a composite extrusion head successfully fabricated specimens for mechanical and interface characterization.
2
A novel 3D-printing process integrates thermoplastic melting, continuous-fiber hot-dipping, and impregnated-composite extrusion for low-cost fabrication of complex CFRTPC components.
3
Controlled fiber orientation and distribution give the process potential for manufacturing load-bearing composite components.
4
For 10 wt.% continuous carbon fiber/ABS specimens, flexural and tensile strengths reached 127 and 147 MPa, respectively, substantially exceeding those of ABS parts and approaching injection-molded CCF/ABS performance.
5
The printed composites exhibited very low interlaminar shear strength of 2.81 MPa, attributed to weak meso-, micro-, and nanoscale interfaces.

3D-printed continuous fiber reinforced thermoplastic composite parts, specifically 10 wt.% continuous carbon fiber/acrylonitrile-butadiene-styrene (CCF/ABS) specimens

The printing mechanism, fiber orientation and distribution, mechanical performance, and interfacial/interlaminar strength of the composite parts

Publication Details
Publication Date
2017-01-16
Journal
Publisher
ISSN
Cited by
537
Access Type
Author Information
Authors
Dichen Li
Xiaoyong Tian
Yi Qian Cao
Chuncheng Yang
Tengfei Liu
Explore further
Open the scid.ai AI chat with a ready-made request: it will find papers on a similar topic and help build a literature review.
Find similar papers in the chat →
Make a presentation
100%